Generic Brand Fingerprint Smart Lock

Our device requires paid assembly and installation services like all products on the market. please contact us for the service fee.

Thanks to imlock comfort, you can now easily open your steel door by showing your fingerprint defined in the device. thanks to our system that does not cancel mechanical keys, you can also open your door with your mechanical keys if you wish. this product, developed by our local engineering and software team, is designed to be suitable for steel doors produced in our country, and it is planned that all used parts can be easily found sustainably for many years.

Our fingerprint reader is designed externally and is embedded in the metal badge that protects the barrel, providing a stylish appearance on the front of the door together with the badge. this way, you can easily open the door by showing your finger, which is now defined to the area where you insert the key and open the door.

When you want to lock the door on the way out of the house from the front of the door, if you show the reader for 3 seconds without lifting a finger that is not defined in the device, the door will automatically lock.

You can easily open and lock the door from the inside, either by using the handle or the buttons located on the device.

Through the speaker on the deviceLoud...and also through the fingerprint reader and the 7 different colored illuminated alerts on the device.VISUALProvides guidance.

When the device is first delivered to the customer, no fingerprints are registered on it. after the device is set up, pressing the middle button on the indoor unit inside the door for 6 seconds will bring up the device menu.

The first finger taught when there are no fingerprints on the device and the next two fingers, that is, the first three fingers are authorized (master) fingers. in case of subsequent use of the device, no one other than the first three master fingers has the authority to access the menu. therefore, it is recommended that the homeowner or authorized person who will use the device in the future be present at the door during the first fingerprint introduction. if this person wishes, he can make his own three different fingers authorized and have the right to use the menu alone. if he wishes, he can use the other two authorized (master) finger rights for other people. entering the device's menu, introducing or deleting users' fingers, and setting the device is the authority of master people. other taught fingers can only use the device and cannot enter the menu.

Teaching the device the first fingerprints

As we mentioned above, the device does not have any fingerprints on it when it first reaches the end user.After the installation of the device is completed and the cable and batteries are installed.The middle button on the indoor unit is pressed for 6 seconds and the device enters the menu.The first menu is a button menu, as will be heard in the voice prompt.The middle button is pressed again and the other menu, the menu for learning the lock limits, appears. this menu is passed, the middle button is pressed again and the menu for adding fingerprints appears.After hearing the voice prompt to add a fingerprint, press the button to the right of the middle button, and a green light will appear inside.We immediately bring our finger to the fingerprint reader located on the badge at the front of the door, and place our finger on the reader. when it takes the first reading, a purple light turns on. we remove our finger from the reader and place it again, waiting for the purple light to turn on again. if a red light turns on, we need to place our finger on the reader again until the purple light turns on.If we put our finger on the reader three times and see the purple light, the green light will finally turn on and our fingerprint will be taught to the system.

After the first fingerprint (master) is taught, after pressing the middle button for 6 seconds, the white light on the fingerprint reader inside and outside the unit will turn on. show the master finger defined in this system to the reader and enter the menu. after the white light appears, show the first master finger defined to the reader and after the green light turns on, you can enter the menu and add or remove other fingers.

Device list

All menus are entered by showing the master finger with priority and progressing in the menu by pressing the middle button.

1. menu: button mode color blue

The blue light menu button that appears with the first sound alert is the menu; from this menu, it is decided whether the device can be operated or not (in some homes with children or pets, it is not preferred to open the door directly with the button). if we want to cancel the operation with the button, we cancel the operation with the button by pressing the button to the left of the middle button while the blue light is on in the menu. in this case, the device is opened and closed from inside the door only with the handle. when we want to activate the buttons again, we activate the operation with the button again by pressing the button to the right of the middle button.

2. menu: understanding lock limits (color: green)

Through this menu, you can teach the system the number of turns of your lock and the working direction of your device as right or left. after indicating the master finger and entering the menu, we close the door and if our lock comes out towards the right side of the door, we press the button to the right of the middle button, and if it comes out towards the left side, we press the button to the left of the middle button. after pressing the button, while the door is closed, the system goes to its destination, stops and returns, completing the turns it has made and opens the door, thus learning the number of turns. it also learns the direction based on the right and left buttons you press according to your lock direction.

Normally, steel door locks are 3 rounds, but if you want 2 rounds or a single round of locking, you can do the above operation when the door is open and teach the system the number of rounds you want by pressing the lock with your hand and preventing it from moving forward.

3. menu: add fingerprint (color: yellow)

From this menu, the fingerprint is taught to the device. after showing the master finger and entering the menu, we proceed to the third menu and verbally reach the add fingerprint menu. in this menu, after pressing the button to the right of the middle button and seeing the green light, we bring the new fingerprint we are going to add to the reader, show our finger to the reader and after seeing the purple light, we remove our finger. after repeating this process three times, when we see the green light on the reader, the new fingerprint is taught to the system.

4. menu: delete fingerprint (color: red)

This menu allows you to delete fingerprints registered on the device. to delete a registered fingerprint, you must be near the device. after the authorized fingerprint is recognized, enter the menu and navigate using the center button. following the audio prompts, you will reach the "delete fingerprint" menu. press the button to the right of the center button, place the finger to be deleted on the front fingerprint reader, and once the green light illuminates, the fingerprint will be deleted.

If the authorized finger wants to delete all fingerprints on the device, it enters the fingerprint delete menu and presses the button to the left of the middle button for 5 seconds. this will delete all fingerprints registered on the device, including authorized fingers. the device will be reset to factory mode.

If you want to delete the fingerprints on the device but there is no authorized fingerprint holder (in cases such as the tenant has moved, etc.), your device can be reset to factory settings by contacting the authorized service for a service fee.

5. menu: learning mode (color: green)

This menu is used to add wireless devices such as wireless fingerprint readers, automation modules, remote controls, and similar devices manufactured by our company. after entering the menu, press the button to the right of the middle button to put the device into pairing mode. the yellow light will flash during this process. then, by sending a wireless signal from the device to be taught, the new wireless device is added to the system.

6. menu: engine sound notification (color: purple)

If you come to this menu and press the button to the left of the middle button, the voice notifications of the door opening and closing while the device is working will be canceled. if you want to turn on the voice notifications again after turning them off, you can activate the door opening and closing voice notification by pressing the button to the right of the middle button after entering the menu.

7. menu: device language (color: turquoise)

Our device offers two language options: turkish and english. the factory setting defaults to turkish. to switch to english, navigate to the 7th menu option and press the button to the right of the center button. to switch back to turkish from english, navigate to the 7th menu option and press the button to the left of the center button.

  Product features:Rosette integrated 500 memory color light warning fingerprint reader,