Bigaimaj Wicker Rattan Patterned Self-Adhesive Lamination Cabinet, Dresser, Nightstand Covering Foil

Product description

Our product dimensions: width: 70 cm, length: 100 cm (please pay attention to the dimensions when purchasing. After determining the size of the area where you will apply, choose how many prints you will take. Example

if the total of the products to be applied is 4 meters, your order quantity should be 4 pieces.

we send you the whole size as 70cm x 400cm. The foils are laminated. The protective film coating is not affected by detergents. There may be a 5-10% difference in tone in the products. No glue is required, it is self-adhesive. You can easily and comfortably apply it yourself. You can also renew your furniture! Our products. It is not affected by water, oil, or humidity. It is made of wipeable material. Application: you can cover your furniture by following these steps.

wipe and clean the dirt and dust using the appropriate cleaning products before proceeding with the adhesive foil covering process on your furniture. Then, thoroughly dry the surface to ensure it's completely free of moisture before applying the coating.

if you have the club on them take them off.

you can put it back on after you coat it. Take the measurement of your furniture using a meter. The most important point you need to pay attention to when taking measurements is to also consider the edges of the furniture.

make pencil marks on foil according to the size you have taken. You can prevent a mark from being left on the color or pattern by marking on the reverse side of the foil.

carefully cut through the places you marked with scissors.

then, separate the foil from the adhesive part by 5-10 cm and paste it on the furniture.

be as slow and careful as possible when doing this. On one hand, open the foil and stick it, on the other hand, push the parts you stick outwards with the help of a rag (you can wrap a credit card with a cloth).

this is a must do process to avoid air bubbles and have a smooth surface.

continue this process until the furniture is fully covered. If you want, you can cut the foil according to different parts of your furniture and apply it piece by piece.

however, the most ideal method is to use the foil in one piece to cover the furniture. Cut the excess on the edge with a utility knife and make the final touches. If you notice small air bubbles on the surface despite your care, you can pop them with the help of a needle or toothpick.

Additional info

• Sold by
  Bigaimaj Baskı
  .
• The selling price on Trendyol already includes the export-related costs.
• Made in Türkiye
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: İBMH18
• Origin: TR