Generic Brand Artemis Antique Covered Paper Holder

The products are carefully prepared and sent in their packages (as specified in the packaging section of the product features) to avoid damage during shipping.

Before assembly situations;

Separate the mounting materials from the packaging of the product.before the installation of the product, clean the surface and the product with a damp cloth.during the installation process, move any items in the installation area that will make your work difficult. __t6__

During assembly

Align and mark the mounting pin that comes out of the product's packaging according to the place where you will mount it on the wall. then, with the help of a drill, make a hole of the size that the dowel will enter. in the meantime, you can prevent dust from spreading around by using a broom throughout the drilling process to avoid getting dirty. after opening the hole, place the dowel firmly into the slot with the help of a hammer. then, you can align the mounting pin with the hole and perform the screwing process. after the screwing process, pass the product straight through the mounting pin and fit the product onto the pin with the allen key that comes out of the packaging or a flat screwdriver depending on the product. after assembling the product, you can check whether the product is standing straight with a spirit level for a final check. __t10__

During use

Our products are made with brass material and coated with a quality coating, so they will serve you for many years. in case of any contamination, you can wipe it with a damp and dust-free cloth. be sure to dry the product after the cleaning process. if the cleaning water is limescale, it may leave a stain on the product. if the product will be left in a construction environment for a long time, be sure to cover it with a protective bag. we wish you to use it in good days. __t14__