Generic Brand 3D Chrome Decorative Nickelaj Series Can Be Used in Interior and Exterior of Vehicles 9mm X 15 Meters

Important note: if you heat the adhesive under the product with a hair dryer before installation in cold weather, it will stick more firmly.

Features: 

Decorative slat adds a stylish look to your car.

It is made of quality materials suitable for outdoor conditions.

It can also be applied according to your taste in indoor environments.

It takes easy form with its soft raw material.

It provides excellent adhesion with its acrylic adhesive double-sided tape.

Decorative slats are used not only in the automotive industry but also in the furniture and construction sectors.

Assembly:

To ensure the best adhesion, the area of the vehicle to be applied should be clean and dry.

A higher ambient temperature makes installation easier.

In cold environment conditions, it is recommended to heat the product and the ground with warm air.

Before sticking the product to the floor, the necessary measurements should be determined and the cut should be made accordingly, then the sticking process should be carried out.

It should be remembered that each removal and reapplication process after incorrect application reduces the quality of adhesion.

The material should be pasted immediately after the removal of the adhesive tape foil, and the surface of the tape should not be contaminated.

After application, pressure should be applied to the material for some time to ensure that the adhesive tape is fully adhered to the floor.