Description

Welcome to my shop~

# Motorcycle Sticker Instruction Manual ##

Product Specifications

- Size: 20–30CM per sheet (suitable for side panels, fuel tanks, spoilers, etc.)

- Weight: 30 grams

- Material: Outdoor-grade PVC sticker, waterproof, sun-proof, scratch-resistant, and wear-resistant

- Application: This sticker is universal and suitable for motorcycles, cars, bicycles, skateboards, laptops, luggage compartments, front and rear of vehicles, side doors, fuel tanks, plastic parts, metallic paint, carbon fiber parts, and other smooth surfaces.

## Step-By-Step Instructions For Using  ##

1: Clean the Application Surface

Wipe the target sticking area thoroughly with clean water mixed with neutral detergent. Remove dust, grease and dirt completely, then wait for the surface to fully dry.

2: Suitable Application Environment

Indoor installation is highly recommended. Outdoor environments have abundant floating dust; high ambient temperature will easily cause air bubbles to form under the sticker after pasting.

3: Position & Align the Sticker

Do not peel off the backing adhesive paper first. Place the whole sticker on the target spot, adjust its angle and central position to your satisfaction, fix the position before formal pasting operation.

4: Post-Pasting Notice Within 48 Hours

Do not wash the vehicle, drive at high speeds or expose the sticker to rainwater within 48 hours after sticking the sticker, to guarantee stable adhesion.

Avoid using a high-pressure water gun to spray directly on the edges of the sticker within a week to prevent it from peeling off.

## Bubble/Wrinkle Handling ##

1. Small air bubbles: Prick small holes with a needle, squeeze out the air, and flatten.

2. Large wrinkles: Gently peel off and reapply; do not pull forcefully to avoid deformation.

## Precautions ##

1. It is not recommended to apply the sticker to new car paint that has not fully cured, damaged paint, matte surfaces, or rough textured surfaces.

2. The sticker should not obstruct headlights, license plates, or the driver's view to avoid violating traffic regulations.

3. Long-term outdoor use will cause natural fading over time, which is normal.

## Removal Methods ##

1. Slowly peel off at an angle at room temperature; it is less likely to leave adhesive residue.

2. Residual adhesive: Wipe with adhesive remover or alcohol, then clean with a soft cloth.

3. Difficult to peel off at low temperatures: Use a hairdryer on a low temperature to soften the adhesive layer before peeling off.