Proskit MT-2208 Protected Analog Multimeter

Proskit MT-2208 Protected Analog Multimeter
This multimeter is an accurate, safe handheld measuring device that comes with a mirrored aluminum dial, a sturdy protective case, a built-in stand, and a connection design. The MT-2027 runs on batteries and provides accurate, reliable measurements of DC/AC voltage, +/-DCV, DC current, resistance, diodes, LEDs, transistors, decibels, continuity, and capacitance with high precision and quality performance. This meter is designed with full overload and misuse protection via a double-sided glass-epoxy PCB, two fuses, a voltage suppressor, and diodes, as well as smart protection during testing via an additional resettable fuse and a varistor.

It is ideal for indoor use in laboratories, schools, workshops, and homes.

Analog Multimeter with Protection Function

Fast response

Multifunction

Accurate measurement

Rugged protective case

1000V/10A Test Probe

CAT II 1000V / CAT III 500V

Infrared Remote Control Test

DCV: 0.25 V, 1 V, 2.5 V, 10 V, 50 V, 250 V ±3% FSD; 1000 V (2500 V) ±4% FSD

ACV: 10 V–50 V–250 V ±4 % FS; 1000 V (2500 V) ±5 % FS

DCA: 50 μA–0.5 mA–5 mA–50 mA–500 mA ±3% of full-scale; 10 A ±4% of full-scale

Resistance: X1 (0.2–2 kΩ)/X10 (2–20 kΩ)/X100 (20–200 kΩ)/X1K (200–2 MΩ)/X10K (2 kΩ–20 MΩ)/X100K (20 kΩ–200 MΩ) ±4.0% of the scale length (ARC)

Capacitance: Cx1/Cx10/Cx100/Cx1k/Cx10k Approximate Value

Continuity with a beep: <50Ω

HFE test: Yes

Diode and LED test: Yes

Battery voltage range: 1.2V–3.6V

Infrared signal detection: Yes

Decibel (dB): Yes

FUSE: F0.5A 250V; F10A 250V, Φ5x20mm

Power source: 1.5V AAA battery* 2

Weight : 500 g

Dimensions: 179 × 118 × 50 mm