Packline Marketing Helmet Visor Adhesive Mirror Film 50cm X 30cm

Product description

Packline helmet visor adhesive mirror film - 50 cm x 30 cm is a self-adhesive mirror film designed to give your helmet visor a stylish, sporty, and mirrored look. The film is applied to the inner surface of the visor, thus it remains more protected against external factors.

Product features: * dimensions: 50 cm x 30 cm * self-adhesive * glossy mirror-effect surface * applied to the inside of the visor * wet application with water * can be cut to fit the visor shape * flexible design suitable for curved surfaces * shipped as a single piece application: if possible, remove the visor from the helmet and thoroughly clean the inner surface, removing any dust, oil, or dirt. Spray water on the inner surface of the visor and the adhesive side of the film.

place the film on the inside of the visor by separating the protective layer.

with water, it is easier to make the film in the right position. Using a soft squeegee or similar tool, apply the film from the center outwards towards the edges, pressing out any water and air bubbles. Carefully trim any excess and allow the film to fully cure and adhere to the surface. Important: the application should be done from the inside, not the outside, of the visor. After application, check the vision

if there are wrinkles, bubbles, or deformations that will impair vision, do not use the visor while driving.

Additional info

• The selling price on Trendyol already includes the export-related costs.
• Sold by
  Packline Marketing
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: 5030503098765
• Origin: US