EP GARAJ OTOMOTİV Honda Ies Civic 1996-1998 Model Without Makeup Case Red Front Grille Logo

1. design and material features

• __t2__ raised chrome "h" figure on a deep red background.  usually with a gloss, clear acrylic overcoat on it which gives it a "glass" effect.__t3__

• __t4__ it is produced from hard abs plastic or high quality epoxy filled material that is resistant to heat and outdoor conditions.__t5__

• __t6__ inspired by the original honda type-r (ek9) models.__t7__

2. technical compatibility (96-98 difference)

• The unadorned case front shutter logo is typically larger than the rear logo, but smaller than the massive front logo found on the (99-01) case with embellishments. average dimensions are around __t9__ or __t10__ (may vary depending on the brand).

• The back surface of the logo has a slightly curved structure to fit perfectly to the slope in the middle part of the shutter.

• __t14__ the back has two snap pins and a strong double sided tape that covers the whole ground.__t15__

3. assembly tips

1. __t16__ be careful not to break the tabs while removing the old logo from the shutter. if the shutter has an empty logo slot, be sure to degrease the surface with alcohol or cologne. __t17__

2. __t18__ if the two pins on the back of the new logo don't align perfectly with the holes on your shutter, carefully trim the pins with a side cutter. simply attaching the logo with the included 3m tape will be secure enough. __t19__

3. __t20__ make sure to position the logo perfectly centered before applying it, as removing and reapplying it after sticking could damage the adhesive properties of the tape.__t21__

4.why choose this logo?

• __t22__ the case without makeup highlights the simpler front grid structure.__t23__

• __t24__ if you've swapped out your front bumper signals for orange ones, you'll achieve a perfect color match with the red logo. __t25__

• __t26__ quality acrylic logos are much more resistant to stone chips and washing pressure than standard painted logos.__t27__