Eca Tiera Column Shower System 102158012

Product description

Eca tiera column shower system product code: 102158012 warranty period: 5 years warranty.

Authorized service no: 444 0 322 technical specifications * 250x250 mm articulated shower head * single-function hand shower * product height: 1105 mm * shower head flow axis: 450 mm 5 m anti-twist hand shower spiral 70 cm mixed water inlet spiral the hand shower water flow rate is 11 l/d the shower head water flow rate is 11 l/d 2-way special mechanism diverter can be used with all applique bathroom and shower faucets before installation: • review the manual before installing your fixture. Please keep your manual for the warranty period of your fixture. • please keep your fixture in its original packaging until it is ready to be installed. If the network pressure is over 5 bar, working at this pressure for a long time will shorten the lifespan of your armature. Therefore, use an e.

c.

a pressure reducing regulator at the installation entrance. Install an e., c., a. filter at the entrance of the installation where you will connect your fixture. Before connecting your fixture to the plumbing, run some water to clear any debris from the pipes. Use an e.

c.

a filtered intermediate faucet to connect the sink and kitchen faucet to the plumbing. • chrome-plated fixtures are covered in hot springs, etc. Do not use in places. • do not leave your fixture installed for a long time in buildings under construction.

construction mortar, lime, etc.

materials may spill on the fixture. Additionally, chemical substances in the air can combine with the humidity of the air and cause deterioration on the surface of the fixture. If such materials have fallen on the fixture and stuck during construction, do not scrape using hard objects. If the fixture will remain in the building under construction for a long time, isolate it from the environment by placing a bag over the fixture. • your fixture's ambient temperature is 5 ° 65 with c ° It is designed to work between c.

especially the 5 ° Take necessary precautions to prevent your fixture from being affected by frost in environmental conditions below c. During installation: • do not let a wrench, especially a pipe wrench, come into contact with the surfaces of your fixture during its installation. • use a mounting template during the installation of pipe systems to ensure easy and proper wall mounting of bathroom, sink, and kitchen faucets. • never use a wrench when mounting the flexible connection hoses of the sink and house faucets to the body. The sealing element (o-ring) located at the end of the hoses entering the body is sufficient for sealing. Please ensure that the hoses are properly mounted to the body. After connecting your fixtures to the system, open the valve and observe whether there is any leakage at the connection points of the fixture. If there is a leak at the connection points, make the appropriate assembly to seal the connection. Do not use the fixture without checking for leaks. During use: • wiping your fixture with a soapy cloth and drying it with a dry cloth is sufficient for cleaning. In places where the water hardness is high, you can prevent the formation of gray stains on the surface by wiping the fixture surface more frequently. • do not use abrasive or hard materials, green sponges or scouring pads, or cleaning agents containing acid to clean the surfaces of the fixture. • wipe your fixtures once every six months or as needed with a soft cloth. • in case of any malfunctions that may arise from all kinds of environmental conditions and usage errors, please use original e.

c.

a spare parts to prevent the product feature from deteriorating.

Additional info

• The selling price on Trendyol already includes the export-related costs.
• Sold by
  BAŞARI ISITMA
  .
• Made in Türkiye
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: bşrıst111
• Origin: TR