Eca Spylos Swan Sink Faucet

Product description

Eca spylos swan spout sink faucet 102188126 product features: • the spout length is 133 mm. The height of the exit end is 146 mm. "• descaling aerator • at 3 bar pressure, the amount of water flow is 7.7 liters per minute. in codes marked with ""st"", the maximum is 5 liters per minute." • 360 ° Before installation with swivel outlet tip: • please review the manual before mounting your fixture in place. • keep your manual for the duration of your fixture's warranty. • keep your fixture in its original packaging until the time of installation. If the network pressure is above 5 bars for a long time, it will shorten the lifespan of your fixture. Therefore, use an e.c.a pressure reducing regulator at the installation entrance. Install an e.c.a filter at the entrance of the installation where you will connect your fixture. Before connecting your fixture to the installation, clean the inside of the pipes by running some water. Use an e.c.a filtered intermediate faucet to connect the sink and house faucets to the plumbing system. • chrome plated fixtures hot spring etc. Do not use it on the ground. • do not leave your fixture installed in construction buildings for extended periods of time. Construction mortar, lime, etc. Ingredients can be poured into the fixture. Additionally, the chemical substances found in the air can cause deterioration on the surface of the fixture when combined with the humidity of the air. If such materials fell on the fixture during construction and stuck to it, do not use hard objects to scrape them off. If the fixture will be in construction buildings for a long time, please isolate it from the environment by wrapping it with a bag. • your fixture ambient temperature 5 ° 65 with c ° It is designed to work between c. Specifically 5 ° Please take necessary precautions to prevent your fixture from being affected by frost in conditions below c. During installation: • do not let any keys, especially pipe keys, touch the surfaces of your fixture during the installation of your fixture. • use the installation template during the laying of pipe installations for easy and neat wall mounting of faucets in the bathroom, washbasin and sink. • never use a wrench when mounting the flexible connection hoses of the sink and house mixer taps to the body. The sealing element (o-ring) located at the end of the hoses that enters the body is sufficient for sealing. Make sure the hoses are properly mounted to the body. • after connecting your fittings to the installation, open the valve and observe whether there is any leakage at the connection points of the fitting. If there is a leak at the connection points, please make appropriate installation to prevent leakage. Do not use the fixture without checking for leakage. During use: • wiping your fixture with a soapy cloth and drying it with a dry cloth is sufficient for cleaning. • in places where there is a high level of water hardness, you can prevent the formation of gray spots on the surface by wiping the surface of the armature at more frequent intervals. • do not use green sponges or scouring pads, cleaning agents containing acids, etc. that contain abrasive and hard materials to clean the fixture surfaces. Wipe your fixtures with a soft cloth every six months or as needed. Please use original e.c.a spare parts to prevent any malfunction that may arise from various environmental conditions and usage errors, to maintain the product's functionality.

Additional info

• The selling price on Trendyol already includes the export-related costs.
• Sold by
  BAŞARI ISITMA
  .
• Made in Türkiye
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: E102188126
• Origin: TR