Eca Myra Bathroom Faucet 102102470H

Product description

Eca myra bathroom faucet product code: 102102470h warranty period: guaranteed for 20 years. Authorized service number: 444 0 322 technical specifications output tip length is 170 mm. The upper set connection is g 1/2. Before installing your locking diverter valve with innovative e.c.a hygiene plus coating in chrome, please review the manual. Please keep your manual during the warranty period of your fixture. Please keep your fixture in its original packaging until it is installed. If the mains pressure is above 5 bar, running your appliance at this pressure for extended periods will shorten its lifespan. Therefore, use an e.c.a pressure reduction regulator at the plumbing entrance. Please install an e.c.a filter at the entrance of the plumbing where you will connect your fixture. Before connecting your fixture to the plumbing, flush some water through the pipes to clean them. Use an intermediate faucet with an e.c.a filter to connect the sink and kitchen faucet to the plumbing. Do not use chrome-plated fixtures in places such as spas or similar environments. Do not leave your fixture installed in buildings under construction for a long time due to construction mortar, lime, etc. Ingredients can be poured on the fixture. Additionally, the chemical substances in the air can combine with the humidity and cause deterioration on the surface of the fixture. If such materials have fallen and stuck to the fixture during construction, do not scrape them off using hard objects. If the fixture will be in buildings under construction for a long time, please isolate it from the center by placing a bag over the fixture. Your fixture's ambient temperature is 5. ° 65 with c ° It is designed to work between c Specifically 5 ° Please take necessary precautions to prevent your fixture from being affected by frostbite in the surrounding conditions below c. During the installation of your fixture, avoid letting any keys, especially pipe wrenches, come into contact with the surfaces of your fixture. Use the installation template during the installation of plumbing to ensure that the bathroom sink and kitchen sink faucets are easily and properly mounted on the wall. Never use a wrench when installing flexible connection hoses for sinks and sink faucets to the body. The sealing element (o-ring) located at the end of the hoses where they enter the body is sufficient for sealing. Make sure the hoses are properly installed to the body. After connecting your fixtures to the plumbing, open the valve and observe whether there is tightness at the connection points of the fixture. If there is a leak at the connection points, make appropriate assembly to seal the connection. Do not use the fixture without leak control. During use, it is sufficient to wipe your fixture with a soapy cloth and dry it for cleaning. In places with high water hardness, wipe the surface of the armature more frequently to avoid gray spots on the surface. Do not use abrasive and hard materials such as scouring pads or steel wool, or cleaning agents containing acids, to clean the appliance surfaces. Wipe your fixtures with a soft cloth once every six months or as needed. Use original e.c.a spare parts to prevent any deterioration of the product in case of malfunctions that may arise from all kinds of environmental conditions and usage errors. Cleaning the cleaning process is the process of removing impurities from the surface. With regular cleaning and maintenance, chrome-plated surfaces can maintain their appearance for a long time. Dust and dried-on stains, as well as similar residues, should be cleaned with a damp cloth. If the cleaning water is scaling, it may leave stains on the chrome surface. A cloth with a hard grainy and non-fibrous structure should be used for this during cleaning. For fingerprints on the surface of chrome-plated materials, you can use liquid cleaners designed for cleaning glass surfaces. After cleaning, the surface must be completely dried. it is absolutely necessary to avoid using chemicals containing chlorine, such as salt spirit and bleach, for cleaning.

Additional info

• The selling price on Trendyol already includes the export-related costs.
• Sold by
  ECAWEBTR
  .
• Made in Türkiye
• A maximum of 1 units of this product can be ordered. Trendyol reserves the right to cancel orders over 1 units.
• Barcode No: 869326103727853
• Origin: TR