Eca Luna Sink Faucet102108940

Product description

Eca luna sink faucet product code: 102108940 warranty period: 20 years warranty. Authorized service no: 444 0 322     technical specifications   the length of the spout is 132 mm. Spout height is 121mm. Hidden aerator with scale breaker water flow amount at 3 bar pressure maximum 9.6 lt per minute coating chrome before installation please review the manual before installing your fixture. Please keep your manual for the warranty period of your fixture. Please keep your fixture in its original packaging until it is ready to be installed. If the mains pressure is over 5 bar, operating your fixture at this pressure for an extended period will shorten its lifespan. Therefore, use an e.c.a pressure reducing regulator at the installation entrance. Install an e.c.a filter at the entrance of the installation where you will connect your fixture. Before connecting your fixture to the plumbing, run some water to clean the inside of the pipes. Use an intermediate tap with an e.c.a filter to connect the sink and kitchen faucets to the plumbing system. Do not use chrome-plated fixtures in hot springs, etc. Do not leave your fixture installed in buildings under construction for a long time, as it may be exposed to construction mortar, lime, etc. Materials can be poured on the fixture. Additionally, chemical substances in the air can combine with the humidity of the air and cause deterioration on the surface of the fixture. If such materials have fallen on the fixture and stuck during construction, do not scrape using hard objects. If the fixture will remain in the building under construction for a long time, isolate it from the environment by covering it with a bag. Your fixture's ambient temperature is 5. ° 65 with c ° It is designed to work between c. Especially the 5 ° Take necessary precautions to prevent your armature from being affected by frost in environmental conditions below c. During assembly: when assembling your fixture, avoid contact between the fixture's surfaces and any wrenches, especially pipe wrenches. Use a mounting template during the installation of pipe systems to ensure easy and proper wall mounting of bathroom sink and kitchen sink faucets. Never use a wrench when installing the flexible connection hoses of sink and kitchen faucets to the body. The sealing element (o-ring) located at the end of the hoses entering the body is sufficient for sealing. Please ensure that the hoses are properly mounted to the body. After connecting your fixtures to the system, open the valve and check if there are any leaks at the connection points of the fixture. If there is a leak at the connection points, make an appropriate assembly to seal the connection. Do not use the fixture without checking for leaks. During use: wiping your fixture with a soapy cloth and drying it is sufficient for cleaning. In places where the water hardness is high, you can prevent the formation of gray stains on the surface by wiping the fixture surface more frequently. Do not use abrasive or hard materials, green sponges or scouring pads containing acid, or cleaning agents containing acid to clean the surfaces of the fixture. Wipe your fixtures down once every six months or as needed with a soft cloth. Use original e.c.a spare parts to prevent product feature deterioration in case of any malfunctions that may arise from environmental conditions and usage errors. Cleaning   cleaning is the process of purifying a surface of foreign substances. With regular cleaning and maintenance, chrome surfaces can maintain their appearance for a long time. Dried dust on the surface and similar polluting residues should be cleaned with a wet cloth. If the cleaning water is limey, it can stain the chrome surface. For this, a cloth that is not hard-grained and fibrous should be used during cleaning. Liquid cleaners that are used to clean glass surfaces can be used for fingerprints left on the surface of the chrome material. After the cleaning process, the surface must be completely dried. it is strictly advised to avoid using chemicals containing chlorine, such as salt spirit and bleach, for cleaning.

Additional info

• The selling price on Trendyol already includes the export-related costs.
• Sold by
  ÇağdaşYapı
  .
• Made in Türkiye
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: 8693261024018
• Origin: TR