Microphones and Accessories category
#1 Most viewed
Trendyol Plus Exclusive
Trendyol's commitments
Easy and free return in 15 days.
Answer from Market Plus AE
Answer from Market Plus AE
1.Measured with the dji mic mini (2 tx + 1 rx + charging case) paired with a fully charged charging case, with noise cancellation turned off during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via a camera audio cable (3.5mm trs).
2.Dji mic mini transmitters can be directly connected to select dji products (one tx for osmo action 4, up to two txs for osmo pocket 3 and osmo action 5 pro). The working time of the transmitter is about 7 to 8 hours when connected directly. Additional dji products will be supported in the future.
3. Powerful and essential noise cancellation levels can be set through the dji mimo app or dji osmoaudio™ When using an osmo action 5 pro, osmo action 4, or osmo pocket 3 connected to one or more transmitters through the direct connection, it can be adjusted directly from the product interface. When the transmitter is directly connected to a smartphone, the noise canceling level cannot be adjusted in the mimo app, it defaults to strong level.
4. When the transmitter is used with the receiver, automatic limiting is enabled by default, which can be turned on or off through the dji mimo app
When the transmitter is directly connected to a smartphone via bluetooth, this feature is enabled by default and cannot be turned off. This feature is available for dji osmoaudio™ When using an osmo action 5 pro, osmo action 4, or osmo pocket 3 connected to one or more transmitters through the direct connection, it can also be turned on and off directly from the product interface.
5. The weight of a single transmitter does not include the clip magnet.
6. Measured with noise cancellation off, during close-range audio recording under non-interference conditions, with the transmitter connected to the receiver and the receiver connected to a camera via camera audio cable (3.5mm trs), using dji mic mini (1 tx + 1 rx).
7. Transmitters and receiver battery levels were measured in a controlled environment with 25% below, using a 5v output charger, with noise cancelling turned off, under close range audio recording with no interference, with both transmitters connected to the receiver and the receiver connected to a camera via a camera audio cable (3.5mm trs).
8. Measured in a controlled test environment.
9.This feature is only effective when the device is on. If the auto-off feature is enabled for the transmitter and receiver in the dji mimo app, both devices will automatically turn off if no pairing signal is detected after 15 minutes.
10. Measured in an open, unobstructed and interference-free environment and for reference only.
11. For a list of compatible devices, please refer to the downloads page on the official dji mic mini web page.
12. If your phone uses a lightning interface, the receiver cannot be powered by the phone's battery without an external power source. You need to purchase the dji mic mini phone connector (lightning) separately to enable simultaneous charging and use.
13. While connecting directly to a smartphone via bluetooth, it only supports filming through third-party apps. For the list of compatible apps, please refer to the product page on the official website.
14. When using an ios mobile device, dji mic mini firmware updates are only supported via bluetooth, not via usb-c or lightning connection.
Women's Baggy Relaxed Fit Sweatpants
