Free shipping
Choice diy kit 2PCS L12-2 Dual Channel Amplifier Board 150W+150W HiFi Stereo Audio Power DC12V-55V
Special Deals
Trendyol's commitments
Easy and free return in 15 days.
Highlighted features:
Choice1 diy kit 2PCS L12-2 Dual Channel Amplifier Board 150W+150W HiFi Stereo Audio Power DC12V-55V features
Seller information
Choice1 diy kit 2PCS L12-2 Dual Channel Amplifier Board 150W+150W HiFi Stereo Audio Power DC12V-55V reviews
Product details

Additional info
- A maximum of 10 units of this product can be ordered. Trendyol reserves the right to cancel orders over 10 units.
- Barcode No: 3642892378639
Choice1 diy kit 2PCS L12-2 Dual Channel Amplifier Board 150W+150W HiFi Stereo Audio Power DC12V-55V features
Safety information
Product description
Color:diy kit
L12-2 amplifier post stage kit. A high-performance amplifier designed and rigorously tested by LJM himself.
L12-2 is mainly a monitoring based, ultra-low distortion amplifier.
L12-2 is more suitable for professional users who have very high accuracy requirements for details.
LJM does not provide circuit diagrams for all models.
Supply voltage within+-55V.
Parameters:
Power=120W/8R+-50V voltage
200W 4R+-50V voltage
THD<0.0005% 1K HZ 10W
SR = 35V/US
Damping coefficient>200, 8 ohm load
Input sensitivity=1.6V output 120W 8R
Frequency response range=15HZ-50K HZ (-3DB)
20HZ* 20K HZ =-0.02 DB
Static current=30mA
Voltage usage range=DC positive and negative dual voltage+-12V to+-55V
Voltage amplification factor=31 times
L12-2 has been used by thousands of users since 2006 and has received very good feedback, making it a classic model in the L series.
Stable and reliable, with first-class performance. The L series amplifiers are strictly measured using various instruments, and are not copied from various brands of counterfeit amplifier boards online.
The L series has undergone years of research and improvement, as well as reliability testing, so please feel free to use it.
The loose parts need to be welded by themselves. After installation, as shown in the picture
Static current regulation: Adjust the DC voltage between OUT+, TEST, and 2 points to DC3MV
Input signal THD+N test
When the input voltage is 700MV, the output voltage is approximately 23VPP and the load is an 8-ohm resistor.
The following test uses an 8 ohm 1000W power resistor.



