Choice 1.0MM 50g Low Melting Point Lead-Free Solder Wire Coil SN99.3/Cu0.7 High Purity Environmental Protec

Diameter:1.0MM

Type:50g

unleaded

Tin (Sn): 99.7% ; Copper(Cu): 0.3%
Diameter:0.6mm/1.0mm
Weight : 20g/30g/50g/100g (Including Roll Weight)
Instructions:20g(Net:10g),30g(Net:20g),50g(Net:30g),100g(Net:80g)
Effective Rosin Flux Core Cleans The Surface
During soldering spatter less, smoke less, smell feel relaxed
Good solderability, Insulation resistance, no spattering and Non-corrosive.
Suitable for Widely used in electrical, electronics and others

【 High quality lead-free solder wire 】Our wires are made of high quality, environmentally friendly lead-free solder,compliant and suitable for a wide range of welding tasks.

【 Rosin core flux 】The rosin cored flux is built into the wire to ensure excellent welding performance. The rosin core flux is evenly distributed, so that the solder joint is firm and smooth, and the welding quality is improved.

【 Wire performance 】Low melting point, good activity, high insulation resistance, fast welding speed, reduce the thermal shock caused by welding components. Reduce welding time and improve production efficiency. Suitable for fine welding operations and various electronic parts maintenance.

【 Widely used 】Lead-free solder wire is widely used, suitable for electronic repair, circuit board manufacturing, lead-free welding, model making, DIY projects, etc.

【 Smooth flow 】Our solder wire ensures good flow and enables a smooth welding process, improving welding accuracy and efficiency.

Usage

1、When used, in order to obtain a good welding effect, the welded part must be weldable, the surface of the welded metal should be kept clean, the use of appropriate lead-free soldering iron head.

2、After opening the soldering iron switch, wait until the soldering iron temperature rises to the required operating temperature before welding.

3、The operator's head should be 20 CM away from the pad.

4、When the soldering iron is not in use, a layer of tin should be plated on the soldering iron, and then turn off the power switch.

5、The working area should be equipped with a suitable air flotation device.