Arduino Cable Combiner Terminal Block with Latch - Three to Six

Hello sir, it is possible to use it this way. However, if high power-consuming devices such as boilers and washing machines are fed from the same line, the total current should not exceed the capacity of both the terminal block and the cable used. As long as the proper gauge wire is used and the connections are made solidly, the wire stretching by itself is not a problem. For safety, we recommend that you pay attention to the fact that the connections are not lost and that the current capacity of the product is not exceeded.

Hello sir, this ratcheting cable jointer terminal model is generally suitable for single-core or multi-stranded cables ranging from 0.08 mm² to 2.5 mm² (approximately 28–14 AWG). Its current resistance is up to an average of 32A (maximum), and it is preferred in 250V AC systems under nominal use. ⚠️ The wattage is directly related to the voltage. For example: 32A at 220V is theoretically equivalent to ≈ 7000W. However, for safe use, it is recommended to operate below the maximum value under constant load.