Generic Brand Lithofin Fleckstop Plus Impregnating Color Revitalizer 1 Lt -

Lithofin fleckstop plus impregnation and color revitalizing protection product

Lithofin fleckstop plus is a ready-to-use, professional-grade surface protection product specifically developed for ceramic, natural stone, artificial stone, terracotta, and concrete surfaces. it penetrates the surface, reducing the absorption of stain-causing substances like water, grease, and oil. it also enhances the stone's color, making it more intense, vibrant, and distinct. suitable for both indoor and outdoor use, it's particularly recommended for low to medium absorbency surfaces such as granite, gneiss, quartzite, slate, and limestone. it can also be used on polished stone surfaces.

*highlights__t2__

* provides water and oil repellent effect.__t3__

* helps protect the surface against stains.__t4__

* shows colors more intense and vivid.__t5__

* does not create a shiny film layer.__t6__

* can be used in doors and outdoors.__t7__

* suitable for natural stone, artificial stone, ceramic, terracotta and concrete surfaces.__t8__

* ready to use. * it is professional solution for surface care and protection.__t9__

*areas of use*__t10__

* natural stone surfaces__t11__

* granite, gneiss, quartzite, slate, limestone__t12__

* terracotta surfaces__t13__

* absorbent ceramic coatings__t14__

* artificial stone surfaces__t15__

* concrete surfaces__t16__

* indoor and outdoor floor and wall surfaces__t17__

*application information* the surface to be applied to must be completely dry, clean, and free of any release agents. the product can be applied using a brush, roller, or cloth. it should be evenly distributed across the entire surface, and any excess product should be removed before it dries. on highly absorbent surfaces, a second application can be made approximately 5 minutes later. it is strongly recommended to test the product on a small, inconspicuous area before full application. *drying and effect time* the majority of the solvent will evaporate within approximately 2 hours. the surface can be walked on after approximately 12 hours. the impregnation effect reaches its full performance within 24 to 48 hours.

*consumption* varies according to the absorbency of the surface. for example, on honed granite and cut granite, approximately 10–15 m² can be achieved, while on slate, approximately 25–30 m² can be achieved.

*things to note__t20__

* not applied on non-absorbent or wet surfaces.__t21__

Not to be used on surfaces that have been previously treated with impregnation.__t22__

Does not make acid-prone surfaces like marble and limestone acid-resistant.__t23__

Glass, plastic, varnished and solvent sensitive surfaces should be protected from splashes.__t24__

Keep out of the reach of children.the area should be well ventilated when applying, and wearing protective gloves, goggles and appropriate protective equipment should be worn.__t25__

*product type:* impregnation and color refreshing surface protection product__t26__

Brand:__t27__

Lithofin__t28__

Origin:__t29__

Germany__t30__

*vendedor:* deconart building__t31__