Generic Brand Liona Sink (Matte Black) t Pipe

Ar liona spiral kitchen faucet - matte black

• Product code: 103518130
  
• Warranty period: it is guaranteed for 2 years.
  
• Authorized service number: 444 0 322
  
• 
  

  
  

  
  

  technical specifications
  

  
  

• 150 cm spiral that does not buckle
  
• Spout height 240 mm
  
• Spout length is 195mm
  
• Hand shower with lime crusher
  
• Dual function hand shower
  
• 
  

  
  

  
  

  coating
  

  
  

• chrome
  

• 
  

  
  

  Before assembly
  

  
  

• Please review the manual before installing your fixture.
  
• Please keep your manual for the duration of your fixture's warranty.
  
• Please keep your fixture in its original packaging until it is ready to be installed.
  
• If the network pressure is over 5 bar, operating your fixture at this pressure for a long time will shorten its lifespan. therefore, use an e.c.a pressure reducing regulator at the entrance of the installation.
  
• Install an e.c.a filter at the entrance of the installation where you will connect your fixture.
  
• Before connecting your fixture to the plumbing, run some water to clean the pipes inside.
  
• Use an e.c.a. filtered intermediate tap to connect sink and kitchen faucet aerators to the plumbing system.
  
• Do not use chrome-plated fixtures in hot springs, etc.
  
• Do not leave your fixture installed in buildings under construction for a long time, construction mortar, lime, etc. materials can spill on the fixture.
  
• Additionally, chemicals present in the air can combine with the humidity and cause deterioration on the surface of the fixture. if such materials have fallen on the fixture during construction and have stuck, do not scrape using hard objects.
  
• If the fixture will remain in the building under construction for a long time, isolate it from the environment by placing a bag over the fixture.
  
• Your fixture is designed to operate within an ambient temperature range of 5°c to 65°c.
  
• Take necessary precautions to prevent your armature from being affected by frost, especially in environmental conditions below 5°c.
  

• 
  

  
  

  During assembly
  

  
  

• During the installation of your fixture, do not let the wrench, especially the pipe wrench, come into contact with the surfaces of your fixture.
  
• Use a mounting template during the installation of pipe systems to ensure easy and proper wall mounting of bathroom sink and kitchen sink faucets.
  
• Never use a wrench when installing the flexible connection hoses of sink and kitchen faucets to the body.
  
• The sealing element (o-ring) located at the end of the hoses entering the body is sufficient for sealing.
  
• Make sure the hoses are properly mounted to the body.
  
• After connecting your fixtures to the system, open the valve and observe whether there is any leakage at the connection points of the fixture.
  
• If there is a leak at the connection points, make the connection tight by proper assembly. do not use the fixture without checking the leak.
  

• 
  

  
  

  During use
  

  
  

• Wiping your fixture with a soapy cloth and drying it is sufficient for cleaning.
  
• In areas with high water hardness, you can prevent gray stains from forming on the surface by wiping the fixture surface more frequently.
  
• Do not use abrasive or hard materials, green sponges or scouring pads, or cleaning agents containing acid to clean the surfaces of the fixture.
  
• Wipe your fixtures down once every six months or as needed with a soft cloth.
  
• Use original e.c.a spare parts to prevent product feature deterioration in case of any faults that may arise from environmental conditions and usage errors.
  

• 
  

  
  

  
  

  Cleaning
  

  
  

  
  

  Cleaning is the process of removing foreign substances from a surface. with regular cleaning and maintenance, chrome surfaces can maintain their appearance for a long time.

  
  

  Dried dust and similar polluting residues on the surface should be cleaned with a damp cloth. if the cleaning water is limescale, it can leave stains on the chrome surface. for this, a cloth that is not hard-grained and fibrous should be used during cleaning. for fingerprints left on the surface of the chrome material, liquid cleaners used to clean glass surfaces can be used.

  
  

  After cleaning, the surface must be completely dry. for cleaning, it is strictly forbidden to use chemicals containing chlorine, such as salt spirit and bleach.__t38__