ANENG 628A Red Automatic Multimeter for Measuring AC/DC Voltage Current and Temperature NCV Non-Cont

Are you still troubled by the difficulty of using these multimeters?
1. Manual range adjustment is troublesome, selecting the wrong gear can easily burn the meter, and beginners dare not use it
2. There is no NCV electrical testing function, and there is a risk of electric shock when detecting live wires with bare or dark wires
3. The screen has no backlight, and the reading is blurry in dim environments. An additional flashlight needs to be found
Using disposable batteries is too expensive, frequent replacement is troublesome and not environmentally friendly
5. Not fully functional, repairing household appliances requires additional purchases of temperature guns, electrical testing pens, and a plethora of tools
Don't make do with it anymore! ANENG 628A multifunctional multimeter, capable of handling all electrical and household appliance maintenance needs with just one device

Specifications
1.Automatic range measurement.
2Full-scale overload protection.
3. Maximum allowable voltage between the measuring temminal and the earth: 1000V DC Or AC 750V rms
4. Working height: up to 2000m
5.Display: 6000 counts LCD full Chinese LCD display, analog bar.
6.Maximum display value: 5999 numbers
7. Polarity indication: automatic indication, "-" indicates negative polarity.
8.Overange display: "OL" or "-OL”
9.Sampling time: about 3 times/second
10.Unit display: with function, power unit display.
11. Automatic shutdown time: about 15 minutes without operation
12.Power supply: 3.7V
13.Battery type: rechargeable lithium battery
14. Temperature coefficient: less than 0.1X accuracy/°C
15.Working temperature:18°C~28°C
16.Storage temperature:-10°C~50°C(remove the battery)

Selling points:

1. 6000-count True RMS: stable readings on ECU, sensor or inverter PWM signals

2. 1000V DC / 750V AC range + 10A direct: tests car battery, alternator, household mains and high-power appliances in one tool

3. 0Ω-60MΩ resistance & 100mF capacitance: checks motor coils, start-caps, heater elements without extra meter

4. NCV (non-contact voltage) in tip: sweep cables to find live wire before stripping—no shock risk

5. Type-C lithium cycle-charging: can be topped-up from phone charger/power-bank

6. HD back-lit large screen + flashlight: clear data in dark panels or engine bay at night

7. One-key “Hz%/ON-OFF Beep” & diode test: quick go/no-go on fuses, relays, injector triggers

8. Auto-range + data-hold + 15min auto-off: one-hand operation, ideal for ladder or under-car work

9. 165g pocket size + stylus sheath: clips on belt, fits glove-box, perfect for site debug, DIY learning, auto inspection

10.CAT III 600V: Meets the safety standards for use

Note:
(1) The product model of the package will be sent according to the SKU ordered by the customer. Please place your order carefully.
(2) When the meter is connected to the measurement circuit, do not touch the top of the pen (metal part).
(3) During measurement, if the measured voltage is higher than 60V DC or 30V AC(effective value), care should be taken to keep the finger always behind the watch pen finger guard device.
(4) If the voltage between the measuring temminal and the earth exceeds 1000V DC or 750V AC, do not measure the voltage.
(5)Voltage below 36V is a safe voltage.
(6)When changing functions and ranges, the pen should be moved away from the test point.
(7)Do not charge to measure resistance, detect line connection, capacitance, or temperature.
(8) During the resistance and line-on test range, care should be taken to avoid connecting the meter to the voltage source.

Package:

Choose according to your own needs