Product description
Product features: the inner is 304 steel, the outside is 201 steel. Cover: it is made of pp material. Pipette: it is made of hard silicone, it has a flexible structure. Usage: as long as you can insert the pipette into the product, it means the lid is locked. To unlock the lid, remove the straw and rotate the pink tab on the lid 90 degrees counter-clockwise. ° You have to rotate it. By doing this process, you can open the lid, otherwise the product form may be distorted
it may even break (if too much force is applied). It is recommended that after putting hot water at 95 degrees into the thermos, you should not immediately close the lid and wait for about a minute.
hot water will expand the metal body and put pressure on the lid. The lids of thermoses filled with hot water should definitely be opened slowly, especially when used with hot liquids, and it is necessary to allow the accumulated pressure to return to normal. These warnings need to be taken into consideration because sudden pressure buildup can cause explosions and fires. Instructions for use
wash the thermos and its accessories before use.
please ensure the lid gasket and components are properly installed to avoid water leakage. Shake with cold water for an iced drink (pre-chilling), or with hot water for hot beverages (pre-heating). The product is not suitable for holding sideways or turning it upside down, it will leak.
be careful to keep the product upright when using it. Maintenance
when not in use for a long time, the inside and outside of the product should be kept completely dry. Please clean and keep dry after each use to prevent odor and bacteria formation. Please use special cleaning materials such as soft sponge cloth. Notes
please place it in a place where babies cannot reach to prevent them from playing. Do not put carbonated drinks. Do not put it in the dishwasher. Hand washing is recommended for longevity. When using the mortar and pestle, avoid using high temperatures or boiling water.
please do not collide to avoid deformation of the flask body.
do not use abrasive powder, metal cleaning, oily cleaners or oxygen-containing cleaners to avoid scratches, rust or corrosion on the surface of the product. Temperature test: when 95-degree water is placed, it drops to 48 degrees in up to 4 hours.
drops to 38 degrees for up to 6 hours.
and the cooling effect is: 6 hours above 12 degrees. Capacity: 1200 ml. Product dimensions: height: 27 cm. Top diameter: 10 cm. Bottom diameter: 7.5 cm. Pipette length: 30 cm. Pipette thickness: 9 mm. Weight: 460 gr. It is in its box.