Schneider Acti9 C60H-DC A9N61501 - 1A 1P C-Curve Solar DC MCB, 6kA

Product description

The Schneider Electric Acti9 C60H-DC A9N61501 is a 1 A, single-pole, C-curve DC miniature circuit breaker for direct-current circuit protection in solar PV, battery and DC distribution systems.

It provides a 6 kA breaking capacity at 250 V DC to IEC/EN 60947-2, using DC-rated arc chambers and magnetic arc control for fast, safe DC breaking and full isolation.

Because DC has no natural current zero-crossing, a DC-rated breaker like the C60H-DC is required

a standard AC MCB must not be used on a DC circuit.

This genuine Schneider Electric Acti9 C60H-DC DC miniature circuit breaker (MCB), reference A9N61501, has a rated current (In) of 1 A, single pole (1P).

It features a C tripping curve, with instantaneous trip at 5 to 10 times rated current.

The network type is DC, with a thermal-magnetic trip mechanism.

Rated operational voltage is 250 V DC per pole (up to 500 V DC with two poles in series).

Breaking capacity is 6 kA at 250 V DC to IEC/EN 60947-2 (10 kA at 220 V DC, 20 kA at 110 V DC).

It has Utilisation Category A, rated impulse withstand (Uimp) 6 kV, and is suitable for isolation.

The polarised single-pole design requires feeding from the bottom terminal.

It mounts on a 35 mm DIN rail, is one 18 mm module wide, with IP20 finger-proof terminals.

This DC MCB protects small DC feeders and control circuits against overload and short circuit in solar photovoltaic arrays, battery banks and general DC distribution, as well as industrial DC control and transport systems.

The C curve tolerates the moderate inrush of PV strings and battery circuits while still providing reliable short-circuit protection.

For DC system voltages above 250 V, connect two poles in series to reach up to 500 V DC.

Applications include Solar PV string and array DC protection, Battery and energy-storage DC circuits, and General and industrial DC distribution and control.

This product is genuine Schneider Electric switchgear.

It is dispatched from Dubai to the UAE and across the GCC, including Saudi Arabia

assistance with SASO and SABER documentation for KSA customs clearance is provided.

The single-pole C 60 H-DC is polarised and must be fed from the bottom terminal, with the load on top

this is the same for every single-pole C 60 H-DC breaker.

Follow the line and load markings, because reversing the polarity stops the magnetic arc control working correctly.

This 1-pole unit is rated 250 V DC with a 6 kA breaking capacity at 250 V DC to IEC/EN 60947-2. The breaking capacity rises at lower voltages, to 10 kA at 220 V DC and 20 kA at 110 V DC.

For system voltages up to 500 V DC, two poles are connected in series.

The C curve trips instantaneously at 5 to 10 times the rated current, which tolerates the moderate inrush of PV strings, battery banks and DC distribution while still protecting against overload and short circuit.

At 1 A it suits small DC feeders and control circuits.

The C 60 H-DC is designed for DC circuit protection in solar PV arrays, battery systems and general DC distribution, as well as industrial DC control and transport applications.

It mounts on a standard 35 mm DIN rail and is suitable for isolation.

Additional info

• Sold by
  Electrical Junction Dubai
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: A9N61501