RELAXUS Tesla Model Y In-Car Inflatable Mattress and Pillow Set Pump Portable Rear Seat Sleeping Travel and Camping

Sir, we have updated our new stocks with the valve model, there is only air, there is sponge inside.

Hello sir, since there is a sponge inside the product, you can easily use it by doubling it without inflating it or inflating it a little.

Hello sir, we do not have different size options. Thank you for your interest.

Hello sir, there are no different sizes, thank you for your interest.

Hello sir, First, open only the outer cover. The plastic seal inside should stay in place, this piece should not be removed. Use the air blowing (OUT / Inflate) part of the pump. Press the pump head to fit the inner valve snugly. If the headgear does not fully contact the valve, air will not enter. Observe the mattress taking shape as you activate the pump during inflation. Stop inflating when the mattress takes its form, not when it hardens. Overinflation is not recommended. After inflation is complete, securely close the outer cap. This step prevents air from escaping. Applied this way the mattress will inflate without a problem.

Hello sir, you can easily inflate and deflate it with the pump sent with it. Thank you for your interest.

Hello sir, it becomes quite compact when completely lowered after use. It is sized to fit in the front trunk (frunk) of a Model Y Juniper. If you need to compare with its dimensions, the packaged form is approximately 45 x 30 x 15 cm. If you have any other questions, we will be happy to help you. 🌟

Hello sir, yes it is electric, it plugs into the trunk lighter.

Hello sir. The black part is used for inflation (pressing air) and the cream-colored part is used for deflation (releasing air). Thus, you can easily inflate and quickly deflate the bed.

Hello, the carrying capacity of our product is approximately 200 kg.

Hello sir, there is a valve system. Thank you for your interest.

Hello sir, yes, it is sent with its pump. Thank you for your interest.

Hello sir, when you put the bed in a flat shape, it takes the shape of the sponge inside, then you can easily inflate it by attaching it to the inlet at the back with the pump sent with it.

Hello, thank you for your interest in our product. Our Tesla Model Y inflatable mattress features a dual air chamber (dual valve) design that allows the right and left sides to be inflated independently. Therefore, it is quite practical to use the product for a single person: Before inflating the product, you need to fold it in half, then inflate only the side you will use. You can save space by leaving the other side empty (not inflated). It is strongly not recommended to try to fold the product after fully inflated due to the air pressure may cause damage to the mattress seams. If there is any other technical details or usage you would like to ask, we are happy to help. We wish you pleasant shopping.

Hello sir, the cap with a round and wide tip will fit. We hope you enjoy using it.

Hello sir, it is approximately 100 cm. Thank you for your interest.

Hello sir, it is expected to be around 4-6 cm. Thank you for your interest.

"Hello, to deflate the bed, it is sufficient to attach the hose to the ""air release"" part of the pump and start it." In this mode, the pump quickly deflates the mattress by sucking air in. If you don't want to use the pump, you can also deflate it by fully opening the valve and gently pressing on the mattress.

Hello sir, the length of the bed when folded is 65 cm. It will easily fit in the front trunk. Thank you for your interest.

Hello sir. This model does not have a valve, so there may be a small amount of air leakage when the pump is released. For this, you need to close the lid immediately with your hand while removing the pump. Once you close the lid tightly, the air loss will stop.

Hello � � Thank you for your valuable feedback. We will forward your suggestion to our relevant team. It would be really useful if the length was a little longer and the idea of ​​a device that can be fixed behind the front seat was taken into consideration. � � Thanks again for your interest and input. � �

Hello sir, detailed measurements are included in the product images, you can compare them with the dimensions of your vehicle. Thank you for your interest and we wish you healthy days.

Hello yes sir, the electric pump of the inflatable bed and pillow set performs both inflation and deflation electrically, which is practical and effortless. Thus, after a comfortable use, it quickly deflates the bed, making it easier to pack. A great choice for your comfortable travels. We wish you pleasant shopping � �

Hello sir, it is 125x180cm. 3. You can see it in detail in the picture.