Product description
4-way lock cat door, door kit inner dimensions 18x18 cm, outer dimensions 22x21 cm.
4-way locking: fully locked - turn the red and green switches to both sides, preventing the pet from entering or leaving the house.
?just - turn the red and green swifles to the right side, the pet is allowed to enter the house, but prevents it from leaving the house.
onlyout only - turn the red and green switches to the left, the pet is allowed to leave home, but preventsthem from entering the house.
? Fully open - turn the red and green switches to the middle, the pet can leave and exit at any time.
how to install? 1.
outline the doordraw the cat door frame on a paper board and cut it.
use a pencil on the cut paper edge on the door where you want it fixed.
2.
cut a tunnel hole first, it is better to drill holes at the corners of the outline.
is to cut the whole tunnel hole block with a saw to make it
3.
wrap the tunnel hole tunnel hole after cutting, it is better to wrap it with a piece of wood.
and quite necessary if your hole cut a little big.
4.
cut the depth if necessaryif the cat flap door is too thick for the door you want it to secure to, use a pair of scissors or a cutting tool to cut along line a or b as shown. Mount the cat flap on the door with double-sided tape.
8 screws are provided for your use, tighten with a screwdriver on each side.
6.
complete put the screw holes into the screw holes, press it.
the assembly process is then completed perfectly.
what's in the box? 1 large cat flap door 8 screws 8 screw caps