Hunter Mp-3000 360 ° Full Lap, Fixed Angle and 6.7Mt.-9.1Mt. Mp Rotator Nozzle

Product description

Rotating, multi water flow system uses less water and promotes healthy growth the revolutionary mp rotator features a unique multi-rotating water flow system that saves water. Rather than simply “spraying” the water over the landscape, the mp rotator sends water in multiple streams at a slow, steady rate. This slow application rate allows the soil to absorb water gently, ensuring a uniform distribution throughout the irrigated area. This increase in efficiency results in a 30% reduction in water usage compared to traditional sprays, significantly reducing the amount of water that goes to waste. By fitting to any conventional spray head body or to bush adaptor, mp rotator converts them into sprinklers with the same high uniform distribution, low sprinkler rate at any angle and any radius. It is a great choice for newly installed systems as mp rotator provides high distance flexibility (2.5m - 10.7m radius), reduces material cost and introduces a more efficient system. The mp is great for bringing old systems back to life as well. It can solve the problems of installation, low pressure and insufficient coverage area in the existing installation. Application: individual/commercial shooting distance: 2.5 - 10.7 m features really same sprinkling rate at every angle and every radius setting

Radius can be reduced to 25% for all models

Color coded for easy recognition

Dual pop up feature keeps dirt and debris out of the nozzle

Dual pop-up feature keeps dirt and debris out of the nozzle Low sprinkling speed Wind-resistant multi-flow technology Adjustable angle and radius

Very high uniform dispersion

Distribution uniformity the multiple streams of the mp rotator target all sections of the landscape area evenly, providing a uniformity that is superior to traditional spray nozzles. Each flow targets a specific zone to ensure higher efficiency and even coverage. Implementing irrigation at a low sprinkling rate in soils with an infiltration rate lower than 25 mm/hour is of tremendous importance to ensure efficiency. The standard mp rotator series applies water at 10 mm/h, while the sr series has a sprinkling speed of 20 mm/h. The short throw distance capabilities combined with the low sprinkling rate makes the mp rotator sr series the perfect solution for small areas. It is equipped with its own protection mechanism that prevents debris from entering the nozzle when the two-stage pop up mp rotator is not working. The spring of the nozzle is stronger than the pop up spring, keeping it in a retracted state when the system is activated. When the irrigation cycle is completed, the nozzle is retracted until the next cycle to protect the nozzle automaticaly matching sprinkler speed mp rotator ® It has the ability to control the amount of water ejected from the nozzle at different angle and throw distance settings, providing paired sprinkler independent of the setting.

Additional info

• Sold and fulfilled by
  Trendyol
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: 20611698152847
• Origin: US