Generic PoE Injector - Turn an network port into a POE port. Feed it data from the switch and power from the wall, it sends both down one cable to an IP camera or an access point up to 100 m away

Product description

NO SWITCH Skip the PoE switch.

Already have a switch you like? Keep it.

The injector adds PoE to a single line, so you don’t need to replace hardware just to power one device.

ONE CABLE One cable to the device.

Data and power travel together over the same Ethernet run — no separate power lead trailing to the coordinator, camera or access point at the far end.

REACH Reach across the building.

Deliver power and data up to 100 m over Cat5e or better — perfect for a coordinator mounted where there’s no power socket.

STANDARD Standards-based IEEE 802.3af/at with automatic negotiation, so it powers any standard PoE device safely.

Power over the cable you already have.

Turn any ordinary network port into a Power-over-Ethernet port.

Feed it data from your switch and power from the wall, and it sends both down one Ethernet cable — to an SLZB coordinator, an IP camera or an access point up to 100 m away.

No PoE switch required.

Additional info

• Sold by
  J Tech
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: PMPYGUVFBYZ3O24T47