Generic Arduino Uno WiFi Rev2

Product description

Description The Arduino UNO WiFi Rev.2 is the easiest point of entry to basic IoT with the standard form factor of the UNO family.

Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a Bluetooth® Low Energy device sending data to a cellphone, the Arduino UNO WiFi Rev.2 is your one-stop-solution for many of the basic IoT application scenarios.

Add this board to a device and you'll be able to connect it to a WiFi network, using its secure ECC608 crypto chip accelerator.

The Arduino Uno WiFi is functionally the same as the Arduino Uno Rev3, but with the addition of WiFi / Bluetooth® and some other enhancements.

It incorporates the brand new ATmega4809 8-bit microcontroller from Microchip and has an onboard IMU (Inertial Measurement Unit) LSM6DS3TR.

The Wi-Fi Module is a self-contained SoC with integrated TCP/IP protocol stack that can provide access to a Wi-Fi network, or act as an access point.

It is the u-blox NINA-W102 and (here) you find the datasheet.

The Arduino UNO WiFi Rev.2 has 14 digital input/output pins—5 can be used as PWM outputs—6 analog inputs, a USB connection, a power jack, an ICSP header, and a reset button.

It contains everything needed to support the microcontroller.

Simply connect it to a computer with a USB cable or power it with an AC adapter or battery to get started.

Compatibility This board has the Microchip ATmega4809 microcontroller, but thanks to the compatibility layer included in the core, you can run all the sketches made for the UNO's ATmega328P microconntroller on the ATmega4809. You can find more information about the usage of this mode in the Getting Started page of the Arduino UNO WiFi Rev.2. Bluetooth® and Bluetooth® Low Energy The communications chipset on the Arduino UNO WiFi Rev.2 can be both a Bluetooth® and Bluetooth® Low Energy client and host device.

Something pretty unique in the world of microcontroller platforms.

If you want to see how easy it is to create a Bluetooth® central or a peripheral device, explore the examples at our ArduinoBLE library.

Related Boards If you are looking at upgrading from previous Arduino designs, or if you are just interested in boards with similar functionality, at Arduino you can find: MKR WiFi 1010: the small form factor version of the Arduino UNO WiFi Rev.2, with a battery connector and an additional I2C port.

Read more here.

Nano 33 IoT: if you need an even smaller form factor, this board sacrifices the battery connector, but the basic functionality is essentially the same.

Visit its product page here.

MKR WiFi 1000: can only run WiFi applications, as it includes a different chipset than the MKR WiFi 1010. Read more about it here.

Specifications Microcontroller ATmega4809 (datasheet) Operating Voltage 5V Input Voltage (recommended) 6 - 20V Digital I/O Pins 14 — 5 Provide PWM Output PWM Digital I/O Pins 5 Analog Input Pins 6 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 48 KB (ATmega4809) SRAM 6,144 Bytes (ATmega4809) EEPROM 256 Bytes (ATmega4809) Clock Speed 16 MHz Radio module u-blox NINA-W102 (datasheet) Secure Element ATECC608A (datasheet) Inertial Measurement Unit LSM6DS3TR (datasheet) LED_BUILTIN 25 Length 68.6 mm Width 53.4 mm Weight 25 g Documentation OSH: Schematics The UNO WIFi REV2 is open-source hardware! You can build your own board using the following files: EAGLE FILES IN .

ZIP SCHEMATICS IN .

PDF Pinout Diagram

Additional info

• Sold by
  Blue PCB Electronics
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: 2900000000858
• Origin: IT