Free shipping
Generic 7A18 DC-DC Vehicle Charging Board 8V-35V 5V 8A Power Supply Depressurization Module 4 port USB Output mobile Charger
No reviews yet.
Lowest price in 14 days
-10%
40.05
AED
44.50
(incl. VAT)
Free shipping
Delivery address
Local delivery
Estimated delivery: 28 - 30 October
Select your address, find out the delivery date!
Trendyol's commitments
Easy and free return in 15 days.
Payment methods
Highlighted features:
Generic 7A18 DC-DC Vehicle Charging Board 8V-35V 5V 8A Power Supply Depressurization Module 4 port USB Output mobile Charger features
Other Features
Supports charging 4 mobile phones simultaneously with 8A total current; Multiple input and output modes (terminal input, DC seat input, 4 * USB output, terminal output 5V); Dynamic response speed: 300 µs; Conversion efficiency: 95%; Load adjustment rate: 0.2-0.3%; Ripple & noise: 120 mVP-P; Switching frequency: 100 kHz; No load current: 18 mA; Wiring mode: IN input OUT input terminal DC base; Fixing method: M3 * 1 M2 * 2; Pin mode: VIN+ input positive pole, GND common ground, OUT+ output positive pole
Instructions for Use/Warnings
(1) Do not use under overvoltage or overload; otherwise, the battery and power supply will be damaged.
(2) The module can only reduce voltage but not increase voltage and cannot supply power to electrical equipment higher than the input voltage.
(3) Ventilation and heat dissipation shall be paid attention to when working with large current and power under full load for a long time to prolong the service life of the power supply.
(4) Do not work at full load for a long time. Please leave a 20% margin when working continuously. Pay attention to ventilation and heat dissipation.
Blue PCB Electronics
7.7
Seller information
Generic 7A18 DC-DC Vehicle Charging Board 8V-35V 5V 8A Power Supply Depressurization Module 4 port USB Output mobile Charger reviews
No reviews yet.
Product details
Product description
Description Input voltage: DC 8-35V Output: 5.5A Output voltage: 5.2V Output current: 8A in total, adaptive current, 2A for single port charging of mobile phones.
Dynamic response speed: 300 µs (load flow changes by 5%) Conversion efficiency: 95% (measured from 12V to 5.2V3.5A, the efficiency is related to the pressure difference and load size.
) Load adjustment rate: 0.2-0.3% (measured by 10%–50% load 12V input) Ripple &
noise: 120 mVP-P (measured from 12V to 5.2V3A at 20 MHz bandwidth) Switching frequency: 100 kHz No load current: 18 mA (measured at 5V on a 12V vehicle) Wiring mode: IN input OUT input terminal DC base Fixing method: M3 * 1 M2 * 2 Net weight: about 36g Supported devices Mobile phone, digital camera, tablet computer, navigator, tachograph, and other devices that need USB power supply.
It can charge 4 mobile phones at the same time, with a total current of 8A.
Multiple input and output modes, supporting terminal input, DC seat input, and output supporting 4 * USB output, terminal output 5V.
Pin mode VIN+ input positive pole, GND common ground, OUT+ output positive pole Matters Needing Attention (1) Do not use under overvoltage or overload
otherwise, the battery and power supply will be damaged.
(2) The module can only reduce voltage but not increase voltage and cannot supply power to electrical equipment higher than the input voltage.
(3) Ventilation and heat dissipation shall be paid attention to when working with large current and power under full load for a long time to prolong the service life of the power supply.
(4) Do not work at full load for a long time.
Please leave a 20% margin when working continuously.
Pay attention to ventilation and heat dissipation.
Additional info
- Sold by .
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Barcode No: 2900000000445
Generic 7A18 DC-DC Vehicle Charging Board 8V-35V 5V 8A Power Supply Depressurization Module 4 port USB Output mobile Charger features
Other Features
Supports charging 4 mobile phones simultaneously with 8A total current; Multiple input and output modes (terminal input, DC seat input, 4 * USB output, terminal output 5V); Dynamic response speed: 300 µs; Conversion efficiency: 95%; Load adjustment rate: 0.2-0.3%; Ripple & noise: 120 mVP-P; Switching frequency: 100 kHz; No load current: 18 mA; Wiring mode: IN input OUT input terminal DC base; Fixing method: M3 * 1 M2 * 2; Pin mode: VIN+ input positive pole, GND common ground, OUT+ output positive pole
Instructions for Use/Warnings
(1) Do not use under overvoltage or overload; otherwise, the battery and power supply will be damaged.
(2) The module can only reduce voltage but not increase voltage and cannot supply power to electrical equipment higher than the input voltage.
(3) Ventilation and heat dissipation shall be paid attention to when working with large current and power under full load for a long time to prolong the service life of the power supply.
(4) Do not work at full load for a long time. Please leave a 20% margin when working continuously. Pay attention to ventilation and heat dissipation.
Safety information
Product safety information