Generic 5B12 HLK-PM12 AC-DC 220V to 12V Step-Down Power Supply Module Intelligent Household Switch Power Supply Module

Product description

Description The HLK-PM12 is an AC-DC power supply module that converts 220V to 12V.

It is an efficient and affordable option for converting the household power supply to a more suitable output for electronic devices.

It features an intelligent design that allows for easy control and maximum protection against overcurrent and overvoltage.

Overall, it is a reliable and safe choice for use in homes.

Features Wide range input: 85-264VAC/70-350 VDC Input and output isolation voltage: 3000 VAC No-load power consumption: ≤0.1W Working temperature range: -25 °C Fully enclosed plastic housing, in keeping with UL94V-0 level High output short circuit, over-current protection and self-recovery glue potting, dustproof, moisture-proof, shockproof, flame-retardant Meet UL, CE, and safety testing requirements Using high-quality, environmentally friendly waterproof thermal conductive Can be suing in medical, industrial control, electric power, instrumentation, communication, railway and other fields Environment Condition Working Temperature: -25—+60 °C Storage temperature: -40—+80 °C Relative humidity: 5–95% Thermal methods Natural cooling Atmospheric pressure: 80–106 Kpa Altitude ≤2000 m Vibration Vibration coefficient 10~500Hz, 2G10min.

/1cycle, 60min.

each along X,Y,Z axes Meets requirements for secondary road transportation Input Features (test at room temperature) Rated input voltage: 100-240 Vac Input voltage range: 85-264VAC/70-350 VDC The maximum input voltage is 270 VAC.

The maximum input CURRENT is ≤0.1A Input inrush current: ≤10A Input low start ≤50mS Input voltage efficiency ≤69%/70% (110/220 VAC) External fuse recommended :1A/250Vac or 10Ω wire wound resistance, Slow blow Output Features Full-load rated output voltage: 12±0.2% Load regulation: ±0.5% Switching on/off overshoot amplitude: 5 mS (115 VAC/60 VAC, 220 VAC) Output over-current protection Output maximum load: 110–150% A Ripple/Noise ≤70mVp-p (Typ:50) Safety Characteristics Meet UL/CE requirements (UL/CE certification requires customers to self-certify) Safe compatible with battery The input end design adopts UL certification 0.5A insurance The fire ration of PCB board is 94-V0 Safety standards comply with UL1012,EN60950,UL60950 Insulation resistance I/P-O/P＞100M 0hms/500Vdc 25℃ 70%RH Conforms to radiation EN55011, EN55022(CISPR22) Electrostatic discharge IEC/EN 61000-4--2 level 4 8KV/15KV Temperature Rise Safety Design Under normal conditions, the maximum temperature rise of the inner surface of the power supply capacitor, main converter, etc.

does not exceed 90℃，and the maximum temperature rise of the shell surface does not exceed 60℃

Additional info

• Sold by
  Blue PCB Electronics
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: 2900000002586