Free shipping
Generic 4C6 TEC1-12706 Thermoelectric Cooler Peltier Cooling Plate Module
No reviews yet.
38.75
AED
(incl. VAT)
Delivery address
Free shipping
Local delivery
Estimated delivery: 21 - 23 October
Select your address, find out the delivery date!
Trendyol's commitments
Easy and free return in 15 days.
Payment methods
Highlighted features:
Generic 4C6 TEC1-12706 Thermoelectric Cooler Peltier Cooling Plate Module features
Other Features
No moving parts, Fitted with 6-inch insulated leads
Instructions for Use/Warnings
These devices must be used in conjunction with a heat sink to avoid being burned. Important: Do not connect the cell to a power supply for more than a few seconds without a heat-sink on the hot side; otherwise, there will be internal overheating and destruction of the Peltier cell. Before installation, you must provide a dry environment and allow for any condensation from the cold side to drain away and not come into contact with the operating cell. Connect the two leads of the Peltier cell to an appropriate power supply, and importantly, observe the correct lead polarity and attach an adequate heat-sink with a quality thermal conductor grease applied to the warm side of the cell. It is important to identify both the correct lead polarity and the cooling and heating sides of the device.
Blue PCB Electronics
7.8
Seller information
Generic 4C6 TEC1-12706 Thermoelectric Cooler Peltier Cooling Plate Module reviews
No reviews yet.
Product details
Product description
Description Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications, from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts,.
These devices must be used in conjunction with a heat sink to avoid being burned.
Each device is fully inspected and tested.
Fitted with 6-inch insulated leads.
Connected to a 12-volt power supply, the cell will have a temperature differential between the two sides of about 20 °C (68 °F).
Important: Do not connect the cell to a power supply for more than a few seconds without a heat-sink on the hot side
otherwise, there will be internal overheating and destruction of the Peltier cell.
Specifications Model: TEC1-12706 Size: 40mm x 40mm x 4mm Operates : 0~12V DC and 0~4.5A Operates Temperature: -30°C to 70°C Max power consumption: 60 Watts Net weight: 22g Color: White Installation This cooling Peltier cell is very simple to install and use.
Before installation, you must provide a dry environment and allow for any condensation from the cold side to drain away and not come into contact with the operating cell.
Connect the two leads of the Peltier cell to an appropriate power supply, and importantly, observe the correct lead polarity and attach an adequate heat-sink with a quality thermal conductor grease applied to the warm side of the cell
you will feel the warm side and the opposite cool side of the operating cell.
It is important to identify both the correct lead polarity and the cooling and heating sides of the device.
If you want a greater cooling differential, it is recommended to use two Peltier cells, namely, one stacked above the other with the hot side of the upper cell in contact with the cool side of the lower one
an experiment proved the two-stacked cell cooling effect is much better than the single-stage.
Similarly, a three-cell stack produces an even greater temperature differential but requires a larger capacity power supply support.
Package includes 1 x TEC1-12706 Thermoelectric Cooler .
Additional info
- Sold by .
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Barcode No: 2900000008533
Generic 4C6 TEC1-12706 Thermoelectric Cooler Peltier Cooling Plate Module features
Other Features
No moving parts, Fitted with 6-inch insulated leads
Instructions for Use/Warnings
These devices must be used in conjunction with a heat sink to avoid being burned. Important: Do not connect the cell to a power supply for more than a few seconds without a heat-sink on the hot side; otherwise, there will be internal overheating and destruction of the Peltier cell. Before installation, you must provide a dry environment and allow for any condensation from the cold side to drain away and not come into contact with the operating cell. Connect the two leads of the Peltier cell to an appropriate power supply, and importantly, observe the correct lead polarity and attach an adequate heat-sink with a quality thermal conductor grease applied to the warm side of the cell. It is important to identify both the correct lead polarity and the cooling and heating sides of the device.
Safety information
Product safety information