Free shipping
Generic 2E7 MB102 Breadboard Power Supply Module 3.3V 5V For Solderless Breadboard
No reviews yet.
38.75
AED
(incl. VAT)
Delivery address
Free shipping
Local delivery
Estimated delivery: 22 - 24 October
Select your address, find out the delivery date!
Trendyol's commitments
Easy and free return in 15 days.
Payment methods
Highlighted features:
Generic 2E7 MB102 Breadboard Power Supply Module 3.3V 5V For Solderless Breadboard features
Other Features
ON/OFF button switch with indicator LED, Separately controlled 3.3V/5V rails, Off position for jumper, USB-A port for powering dev boards, On-board 3.3V/5V DC output plug pins
Instructions for Use/Warnings
Power with 6.5-12V DC via 2.1mm barrel jack (e.g., 9V battery or wall-wart). Use ON/OFF switch. Output rails can be set independently to 3.3V or 5V, or off. USB-A port for USB-powered dev boards. Apply to MB102 breadboard. Maximum output current: <700mA. Note: This item is only a power supply module; the breadboard is not included.
Blue PCB Electronics
7.8
Seller information
Shoppers also viewed
Collage Series 13 - the Islamic Notebook That Will Make God Pleased with You (with Verses and Hadiths)
Generic 2E7 MB102 Breadboard Power Supply Module 3.3V 5V For Solderless Breadboard reviews
No reviews yet.
Product details
Product description
Description This solderless breadboard power supply module makes powering your prototype a snap.
With a standard 2.1mm barrel jack, you can power it with a 9-volt battery using a Snap-on connector or a wall-wart.
With a convenient ON/OFF button switch with an indicator LED, you don’t have to keep plugging in and unplugging your power source.
The rails are powered separately, so you can have one side at 3.3 volts and the other as 5 volts.
There is also an off position for the jumper to break the circuit and not power the rail at all.
The board has a 2 x 4 group of male headers, with 2 sets for 3.3 volts to GND and 2 sets for 5 volts to GND.
One of our favorite features is the USB-A port to plug in your USB powered dev boards like an Arduino.
This gives the added benefit of tying the breadboard ground to the development board ground as well.
There is a nice feature set on this little board, and it’s a real time saver.
NOTES This item is only a power supply module
the breadboard is not included.
Specifications Apply to MB102 breadboard Input voltage: 6.5–12 V (DC) USB power supply Output voltage: 3.3V/5V can switch over Maximum output current: <
700 ma Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
Size: 53x32x25mm Weight: 12g
Additional info
- Sold by .
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Barcode No: 2900000008878
Generic 2E7 MB102 Breadboard Power Supply Module 3.3V 5V For Solderless Breadboard features
Other Features
ON/OFF button switch with indicator LED, Separately controlled 3.3V/5V rails, Off position for jumper, USB-A port for powering dev boards, On-board 3.3V/5V DC output plug pins
Instructions for Use/Warnings
Power with 6.5-12V DC via 2.1mm barrel jack (e.g., 9V battery or wall-wart). Use ON/OFF switch. Output rails can be set independently to 3.3V or 5V, or off. USB-A port for USB-powered dev boards. Apply to MB102 breadboard. Maximum output current: <700mA. Note: This item is only a power supply module; the breadboard is not included.
Safety information
Product safety information