Free shipping
Delivery address
Free shipping
Local delivery
Estimated delivery: 20 - 22 October
Select your address, find out the delivery date!
Trendyol's commitments
Easy and free return in 15 days.
Payment methods
Highlighted features:
Generic 2D4A US-015 Ultrasonic Module Distance Measuring features
Other Features
Not affected by sunlight, spotlight, and object's surface color; Better accuracy than HCSR04; Stable readings; Requires two digital I/O pins
Instructions for Use/Warnings
Operating Voltage: DC 5V. Requires two digital I/O pins (an output pin and an input pin) for interface. Necessary hardware includes Arduino Uno, US High Accuracy Ultrasonic Sensor module, Male to female jumper wires, and a half breadboard. Setup involves a trigger and an echo pin: a +5V signal is sent to the Trigger pin, which causes the sensor to emit an ultrasonic signal. This signal reflects off an object and is captured by the receiver, making the Echo pin high. The duration the Echo pin remains HIGH depends on the reflected signal. Warning: Acoustically soft materials such as clothes can be difficult to detect. Example code provided: #include #define TRIGGER_PIN 12 #define ECHO_PIN 11 #define MAX_DISTANCE 200 NewPing sonar(TRIGGER_PIN, ECHO_PIN, MAX_DISTANCE); void setup() { Serial.begin(115200); } void loop() { delay(50); Serial.print("Ping: "); Serial.print(sonar.ping_cm()); Serial.println("cm"); }
Blue PCB Electronics
7.8
Seller information
Generic 2D4A US-015 Ultrasonic Module Distance Measuring reviews
No reviews yet.
Product details
Product description
Description This US-015 ultrasonic sensor is your perfect sensor for distance measurement and object detection.
It offers excellent range accuracy up to (1mm) and fairly stable readings at a very low cost.
It requires two digital I/O pins (an output pin and an input pin) to interface with it.
The ultrasonic sensor is created based on the principle of echolocation used by animals like bats and dolphins.
Since the ultrasonic sensor uses sonar to determine the distance to an object, its operation is not affected by sunlight, spotlight, and object's surface color which will affect the readings of any infrared distance sensors.
However acoustically soft materials such as clothes can be difficult to detect.
Features Operating Voltage : DC 5V Current : 2.2mA PinOut : 4 PIN Sensing Range : 2 - 400cm Sensing Angle : less than 15deg Accuracy : 0.1cm+-5% Advantages : Better accuracy than HCSR04 Size (mm): 45 (L) x 20 (W) x 16 (H) Weight : 10 g Pinout Necessary hardware to follow this guide Arduino Uno US High Accuracy Ultrasonic Sensor module Male to female jumper wires Half breadboard Hardware Interface/Setup Its working is quite simple, it has a trigger and an echo pin.
A signal of +5V is sent over to Trigger pin.
When ultrasonic sensor gets a trigger signal on its trigger pin then it emits an ultrasonic signal from the transmitter.
This ultrasonic senor, then goes out and reflected back after hitting some object in front.
This reflected ultrasonic signal is then captured by the receiver of ultrasonic sensor.
As the sensor gets this reflected signal, it automatically make the Echo pin high.
The time for which the Echo pin will remain HIGH, depends on the reflected signal.
Code #include #define TRIGGER_PIN 12 #define ECHO_PIN 11 #define MAX_DISTANCE 200 NewPing sonar(TRIGGER_PIN, ECHO_PIN, MAX_DISTANCE)
void setup() { Serial.
begin(115200)
} void loop() { delay(50)
Serial.
print("
Ping: "
Serial.
print(sonar.
ping_cm())
Serial.
println("
cm"
Additional info
- Sold by .
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Barcode No: 2900000008311
Generic 2D4A US-015 Ultrasonic Module Distance Measuring features
Other Features
Not affected by sunlight, spotlight, and object's surface color; Better accuracy than HCSR04; Stable readings; Requires two digital I/O pins
Instructions for Use/Warnings
Operating Voltage: DC 5V. Requires two digital I/O pins (an output pin and an input pin) for interface. Necessary hardware includes Arduino Uno, US High Accuracy Ultrasonic Sensor module, Male to female jumper wires, and a half breadboard. Setup involves a trigger and an echo pin: a +5V signal is sent to the Trigger pin, which causes the sensor to emit an ultrasonic signal. This signal reflects off an object and is captured by the receiver, making the Echo pin high. The duration the Echo pin remains HIGH depends on the reflected signal. Warning: Acoustically soft materials such as clothes can be difficult to detect. Example code provided: #include #define TRIGGER_PIN 12 #define ECHO_PIN 11 #define MAX_DISTANCE 200 NewPing sonar(TRIGGER_PIN, ECHO_PIN, MAX_DISTANCE); void setup() { Serial.begin(115200); } void loop() { delay(50); Serial.print("Ping: "); Serial.print(sonar.ping_cm()); Serial.println("cm"); }
Safety information
Product safety information