Free shipping
Generic 2A12 16 Channel 12-bit PWM/Servo Driver-I2C interface PCA9685 module
No reviews yet.
44.50
AED
(incl. VAT)
Delivery address
Free shipping
Local delivery
Estimated delivery: 22 - 24 October
Select your address, find out the delivery date!
Trendyol's commitments
Easy and free return in 15 days.
Payment methods
Highlighted features:
Generic 2A12 16 Channel 12-bit PWM/Servo Driver-I2C interface PCA9685 module features
Instructions for Use/Warnings
Do not attempt to drive high current devices such as motors, bulbs etc, directly from the PWM output pins as you will risk damaging the module. VCC should be 3 - 5V max! If you connect VCC to V+ you could damage your board. Each PWM runs completely independently but they must all have the same PWM frequency; you cannot use different frequencies for different outputs simultaneously (e.g., half for LEDs @ 1.0 KHz and half for servos @ 60 Hz). Max current per PWM output pin is 25mA. There are 220 ohm series resistors on all PWM pins, and the output logic is the same as VCC, keep this in mind when using LEDs.
Blue PCB Electronics
7.8
Seller information
Generic 2A12 16 Channel 12-bit PWM/Servo Driver-I2C interface PCA9685 module reviews
No reviews yet.
Product details
Additional info
- Sold by .
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Barcode No: 2900000007376
Generic 2A12 16 Channel 12-bit PWM/Servo Driver-I2C interface PCA9685 module features
Instructions for Use/Warnings
Do not attempt to drive high current devices such as motors, bulbs etc, directly from the PWM output pins as you will risk damaging the module. VCC should be 3 - 5V max! If you connect VCC to V+ you could damage your board. Each PWM runs completely independently but they must all have the same PWM frequency; you cannot use different frequencies for different outputs simultaneously (e.g., half for LEDs @ 1.0 KHz and half for servos @ 60 Hz). Max current per PWM output pin is 25mA. There are 220 ohm series resistors on all PWM pins, and the output logic is the same as VCC, keep this in mind when using LEDs.
Safety information
Product safety information