Free shipping
Generic 1E8 Raindrops Detection sensor module rain weather module Humidity
No reviews yet.
56
AED
(incl. VAT)
Delivery address
Free shipping
Local delivery
Estimated delivery: 21 - 23 October
Select your address, find out the delivery date!
Trendyol's commitments
Easy and free return in 15 days.
Payment methods
Highlighted features:
Generic 1E8 Raindrops Detection sensor module rain weather module Humidity features
Other Features
Adjustable sensitivity, Power indicator LED, Digital and Analog output, Double-sided sensing circuit, Fixed bolt-hole, Anti-oxidation, Good conductivity
Instructions for Use/Warnings
It is recommended that the sensor be powered from 3.3V to 5V. The analog output will vary depending on the voltage supplied to the sensor. The module's Ground and VCC pins must be connected to the Arduino Board's Ground and Pin 7, respectively, and the D0 pins to pin 8 on the Arduino Board. One well-known problem with these sensors is their short lifespan when exposed to moisture. Constantly applying power to the sensing pad accelerates corrosion significantly. To avoid this, it is recommended that you do not power the sensor continuously, but only when taking readings. Connecting the VCC pin to a digital pin of an Arduino and setting it to HIGH or LOW as needed is a simple way to accomplish this. Consider if you use this sensor in situations where the plate is exposed to moisture for an extended period of time.
Blue PCB Electronics
7.8
Seller information
Generic 1E8 Raindrops Detection sensor module rain weather module Humidity reviews
No reviews yet.
Product details
Additional info
- Sold by .
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Barcode No: 2900000008540
Generic 1E8 Raindrops Detection sensor module rain weather module Humidity features
Other Features
Adjustable sensitivity, Power indicator LED, Digital and Analog output, Double-sided sensing circuit, Fixed bolt-hole, Anti-oxidation, Good conductivity
Instructions for Use/Warnings
It is recommended that the sensor be powered from 3.3V to 5V. The analog output will vary depending on the voltage supplied to the sensor. The module's Ground and VCC pins must be connected to the Arduino Board's Ground and Pin 7, respectively, and the D0 pins to pin 8 on the Arduino Board. One well-known problem with these sensors is their short lifespan when exposed to moisture. Constantly applying power to the sensing pad accelerates corrosion significantly. To avoid this, it is recommended that you do not power the sensor continuously, but only when taking readings. Connecting the VCC pin to a digital pin of an Arduino and setting it to HIGH or LOW as needed is a simple way to accomplish this. Consider if you use this sensor in situations where the plate is exposed to moisture for an extended period of time.
Safety information
Product safety information