Free shipping
Generic 1B9 HM-10 transparent serial port Bluetooth 4.0 module with logic level translator
No reviews yet.
44.50
AED
(incl. VAT)
Delivery address
Free shipping
Local delivery
Estimated delivery: 22 - 24 October
Select your address, find out the delivery date!
Trendyol's commitments
Easy and free return in 15 days.
Payment methods
Highlighted features:
Generic 1B9 HM-10 transparent serial port Bluetooth 4.0 module with logic level translator features
Other Features
Master-slave in one, Transparent transmission, Remote control, Data acquisition, Supports AT command, Configurable parameters, Based on CC2540/CC2541 chip, UART serial connection, Bluetooth 4.0 BLE
Instructions for Use/Warnings
Power requirements: +2.5V to +3.3V. Users can change role (master/slave), serial port baud rate, name, and password using AT commands. Default baud rate: 9600 (pre V700 firmware), 115200 (V700+ firmware). Default PIN: 000000. Default name: HMSoft. Compatibility warning: Bluetooth 4.0 only, cannot connect to Bluetooth 2/2.1 modules (e.g., HC-06, HC-05). For more details, refer to: http://www.martyncurrey.com/hm-10-bluetooth-4ble-modules/
Origin
CN
Blue PCB Electronics
7.8
Seller information
Generic 1B9 HM-10 transparent serial port Bluetooth 4.0 module with logic level translator reviews
No reviews yet.
Product details
Product description
Description Most complete, most convenient, and most stable Bluetooth data transmission, remote control, and data acquisition module Master-slave in one, transparent transmission, replacing serial port Remote control, transparent transmission, MCU is unnecessary Remote data acquisition, transparent transmission, MCU is unnecessary The HM-10 Bluetooth module for Arduino (Master Slave) uses the TI CC2540 or CC2540 chip, configure 256KB space, and support AT command.
Users can change the role (master, slave mode) and the serial port baud rate, equipment name, matching password and other parameters on-demand.
It is very flexible to use.
Specifications +2.5v to +3.3v Requires up to 50mA Uses around 9mA when in an active state Use 50-200uA when asleep RF power: -23dbm, -6dbm, 0dbm, 6dbm Bluetooth version 4.0 BLE Default baud rate pre firmware V700 is 9600 Default baud rate firmware V700 and up is 115200 Default PIN is 000000 Default name is HMSoft Based on the CC2540 or the CC2541 chip The latest HM-10s all appear to the the CC2541 chip.
This is the same as the CC2540 except it is lower power and has a shorter range.
The CC254x is based on the 8051 and runs at 32MHz.
The HM-10 is has become a very popular Bluetooth 4 BLE module for use with the Arduino.
In part due to the standard UART serial connection that makes it fairly straight forward to connect to an Arduino.
The UART layer is a good thing and a bad thing, it allows ease of use but it hides the BLE layer so you have no control over the actual BLE side of things.
The HM-10 is Bluetooth version 4.0 only.
This means it cannot connect to Bluetooth 2/2.1 modules such as the HC-06 and HC-05. Here is an excellent article to get you started: martyncurrey.
com/hm-10-bluetooth-4ble-modules/
Additional info
- Sold by .
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Barcode No: 2900000001633
- Origin: CN
Generic 1B9 HM-10 transparent serial port Bluetooth 4.0 module with logic level translator features
Other Features
Master-slave in one, Transparent transmission, Remote control, Data acquisition, Supports AT command, Configurable parameters, Based on CC2540/CC2541 chip, UART serial connection, Bluetooth 4.0 BLE
Instructions for Use/Warnings
Power requirements: +2.5V to +3.3V. Users can change role (master/slave), serial port baud rate, name, and password using AT commands. Default baud rate: 9600 (pre V700 firmware), 115200 (V700+ firmware). Default PIN: 000000. Default name: HMSoft. Compatibility warning: Bluetooth 4.0 only, cannot connect to Bluetooth 2/2.1 modules (e.g., HC-06, HC-05). For more details, refer to: http://www.martyncurrey.com/hm-10-bluetooth-4ble-modules/
Origin
CN
Safety information
Product safety information