Free shipping
Generic 1B19 GY-521 3 Axis Accelerometer Gyroscope Module 6 DOF MPU-6050 Module
No reviews yet.
50.25
AED
(incl. VAT)
Delivery address
Free shipping
Local delivery
Estimated delivery: 21 - 23 October
Select your address, find out the delivery date!
Trendyol's commitments
Easy and free return in 15 days.
Payment methods
Highlighted features:
Generic 1B19 GY-521 3 Axis Accelerometer Gyroscope Module 6 DOF MPU-6050 Module features
Other Features
3-axis gyroscope, 3-axis accelerometer, Digital Motion Processor (DMP), Temperature sensor, I2C serial data bus, Voltage regulator, Interrupt digital output
Instructions for Use/Warnings
This tutorial gives only a brief introduction to the GY-521/MPU-6050. In particular, it is shown how to retrieve the raw sensor values. The sensor values are retrieved by using the I2C serial data bus, which requires only two wires (SCL and SDA). If you plan to use the full range of features or require reliable and stable position data, then it is recommended to look at ready-to-use libraries. An excellent library with many examples can be found at: https://github.com/jrowberg/i2cdevlib/tree/master/Arduino/MPU6050. Pin Layout: VCC can be connected to 3.3V and 5V sources due to the onboard voltage regulator. For AD0, if this pin is LOW, the I2C address will be 0x68; if HIGH, the address will be 0x69. Tutorial: How to use the GY-521 module (MPU-6050 breakout board) with the Arduino Uno.
Blue PCB Electronics
7.8
Seller information
Shoppers also viewed
Set of 4 Lined Notebooks 13 X 20 Cm 56 Sheets Cardboard Cover Spiral Notebook Notebook Line Series
Generic 1B19 GY-521 3 Axis Accelerometer Gyroscope Module 6 DOF MPU-6050 Module reviews
No reviews yet.
Product details
Product description
Description The GY-521 module is a breakout board for the MPU-6050 MEMS (Microelectromechanical systems) that features a 3-axis gyroscope, a 3-axis accelerometer, a digital motion processor (DMP), and a temperature sensor.
The digital motion processor can be used to process complex algorithms directly on the board.
Usually, the DMP processes algorithms that turn the raw values from the sensors into stable position data.
This tutorial gives only a brief introduction to the GY-521/MPU-6050. In particular, it is shown how to retrieve the raw sensor values.
The sensor values are retrieved by using the I2C serial data bus, which requires only two wires (SCL and SDA).
If you plan to use the full range of features or require reliable and stable position data, then I recommend to have also a look at ready-to-use libraries.
Please follow this link to find an excellent library with many examples: com/jrowberg/i2cdevlib/tree/master/Arduino/MPU6050. GY-521 Pin Layout The GY-521 breakout has eight pins: VCC (The breakout board has a voltage regulator.
Therefore, you can connect the board to 3.3V and 5V sources.
) GND SCL (Serial Clock Line of the I2C protocol.
) SDA (Serial Data Line of the I2C protocol.
) XDA (Auxiliary data =>
I2C master serial data for connecting the module to external sensors.
) XCL (Auxiliary clock =>
I2C master serial clock for connecting the module to external sensors.
) AD0 (If this pin is LOW, the I2C of the board will be 0x68. Otherwise, if the pin is HIGH, the will be 0x69.) INT (Interrupt digital output) Tutorial: How to use the GY-521 module (MPU-6050 breakout board) with the Arduino Uno
Additional info
- Sold by .
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Barcode No: 2900000007307
Generic 1B19 GY-521 3 Axis Accelerometer Gyroscope Module 6 DOF MPU-6050 Module features
Other Features
3-axis gyroscope, 3-axis accelerometer, Digital Motion Processor (DMP), Temperature sensor, I2C serial data bus, Voltage regulator, Interrupt digital output
Instructions for Use/Warnings
This tutorial gives only a brief introduction to the GY-521/MPU-6050. In particular, it is shown how to retrieve the raw sensor values. The sensor values are retrieved by using the I2C serial data bus, which requires only two wires (SCL and SDA). If you plan to use the full range of features or require reliable and stable position data, then it is recommended to look at ready-to-use libraries. An excellent library with many examples can be found at: https://github.com/jrowberg/i2cdevlib/tree/master/Arduino/MPU6050. Pin Layout: VCC can be connected to 3.3V and 5V sources due to the onboard voltage regulator. For AD0, if this pin is LOW, the I2C address will be 0x68; if HIGH, the address will be 0x69. Tutorial: How to use the GY-521 module (MPU-6050 breakout board) with the Arduino Uno.
Safety information
Product safety information