Free shipping
Generic 1b16 AT-09 Android IOS HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module
No reviews yet.
50.25
AED
(incl. VAT)
Delivery address
Free shipping
Local delivery
Estimated delivery: 22 - 24 October
Select your address, find out the delivery date!
Trendyol's commitments
Easy and free return in 15 days.
Payment methods
Highlighted features:
Generic 1b16 AT-09 Android IOS HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module features
Other Features
AT+ command set, Customizable baud rate, device name, and pairing PIN, Automatically enters transparent serial mode after pairing, Returns to AT command mode when disconnected, State pin, EN pin, STATE test pins, BRK pin
Instructions for Use/Warnings
Users can customise the baud rate, device name, and pairing pin. AT commands require line ending characters (rn). Use AT+HELP for available commands. VCC input power supply 3.3~6V, Prohibit more than 7V. To disconnect, give a high level to EN pin when connected. STATE and BRK pins should generally be kept unconnected.
Blue PCB Electronics
7.8
Seller information
Shoppers also viewed
Set of 4 Lined Notebooks 13 X 20 Cm 56 Sheets Cardboard Cover Spiral Notebook Notebook Line Series
Generic 1b16 AT-09 Android IOS HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module reviews
No reviews yet.
Product details
Product description
Description The AT-09 series Bluetooth module uses CC2541 BLE chip and supports the AT command.
Users can customise the baud rate, device name, and pairing pin.
Its Rx and Tx pin allows performing serial communication with the BLE chip.
This module is similar and compatible with the HM-10 module and is very flexible to use.
Features: AT+ command set on board AT commands require line ending characters (rn) AT+HELP gets you a list of the available commands Customizable baud rate, device name, and pairing PIN Automatically enters transparent serial mode after the device is paired and connected Returns to AT command mode when disconnected Specifications: Chip: CC2541 Bluetooth version: V4.0 Default baud rate: 9600 Default serial port setting: 9600, N, 8, 1 Default pin: 000000 Voltage: 3.3V VCC: Input power supply 3.3~6V, Prohibit more than 7V GND: Ground TX: Transport RX: Receive State pin: Normally LOW and goes HIGH when the device is connected.
EN pin: When the module is connected, give a high level to “EN”, the module will be disconnected.
Pinout: STATE: state test pins, connected to an internal LED, generally keep it unconnected.
BRK: break connect, it means breaking the Bluetooth connection, generally keep it unconnected.
VCC: positive pole of the power source.
GND: Ground.
TXD: serial interface, transmitting terminal.
RD: serial interface, receiving terminal.
RoboticsBD
Additional info
- Sold by .
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Barcode No: 2900000001640
Generic 1b16 AT-09 Android IOS HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module features
Other Features
AT+ command set, Customizable baud rate, device name, and pairing PIN, Automatically enters transparent serial mode after pairing, Returns to AT command mode when disconnected, State pin, EN pin, STATE test pins, BRK pin
Instructions for Use/Warnings
Users can customise the baud rate, device name, and pairing pin. AT commands require line ending characters (rn). Use AT+HELP for available commands. VCC input power supply 3.3~6V, Prohibit more than 7V. To disconnect, give a high level to EN pin when connected. STATE and BRK pins should generally be kept unconnected.
Safety information
Product safety information