Choice Base and holder 2 For Leapmotor B10 2025 2026 Vehicle-Specific Phone Holder Base Smart Car Phone Mou

Vehicle-specific phone holder base for:  Leapmotor B10 2025 2026.

Note: This base is suitable for left-hand drive and right-hand drive vehicles.

About the base：

1.The base has a 17mm swivel connector that can be attached to most phone holders. You can change the phone holder according to your preference.

2.The base can be easily installed and removed without damaging your car. We provide videos of the installation and use of this base.

The phone holder 1:Magnetic phone holder.

4500G strong magnetic phone holder for car. N52 neodymium, wheelrim design, fits all phones. No shaking, no falling. Vent & dash mount.

>> 4500G magnetic force – holds phone firmly even on rough roads

>> Real N52 neodymium magnet – premium grade, no slipping

>> Unique wheel-rim design – perfect for car enthusiasts

>> ABS matte finish – durable, scratch-resistant, fingerprint-free

>> Includes ring magnet plate – works perfectly with Android & non-magnetic phones

>> One‑second snap – universal compatibility

Drive with Confidence. Hold tight. Drive right:  This Magnetic Car Mount is engineered for drivers who refuse to compromise between style and safety. Its eye‑catching wheel‑rim design brings a touch of automotive passion to your car vent, while the hidden N52 neodymium magnet ring delivers a massive 4500 gauss of holding force – enough to keep even the heaviest smartphones locked in place over potholes and speed bumps.

4500 Gauss, N52 Grade Magnetic Force:  Built with a genuine N52 neodymium magnet ring, delivering up to 4500 gauss of holding power. Your phone stays rock‑solid on bumpy roads, sharp turns, or sudden brakes – no shaking, no falling.

Automotive Wheel‑Rim Aesthetic:  Stand out with a unique wheel‑rim shell design, made of matte ABS. It adds a sporty, enthusiast look to your car interior while providing anti‑slip texture and a fingerprint‑resistant surface.

Specifications:

Magnet material: N52 Neodymium

Magnetic strength: 4500 Gauss

Shell material: Matte ABS

Rotatable ball joint: Yes (360°)

Ring magnet plate included: Yes (for phones without built‑in magnets)

Weight: 72g (mount only)

Compatible phone size: All smartphones (4.0″ – 7.0″)

Universal Compatibility + Ring Magnet Plate Included:  Works with all smartphones. For iPhone 12 and newer (with MagSafe), just snap it on. For Android phones or any phone without built‑in magnetic ring, simply attach the included ring magnet plate to your phone or case – then enjoy the same strong magnetic grip.

The phone holder 2:  Gravity Link Car Phone Mount 

5-Point Stable Support, One-Hand Operation, Aircraft-Grade Aluminum Alloy + Tempered Glass, Strong, Silent & Scratch-Resistant.

Drive with confidence. Our Gravity Link Car Mount uses an intelligent gravity linkage system – simply place your phone in, and the arms automatically lock it tight. The 5-point support design surrounds your phone for rock-solid stability, while aircraft-grade aluminum alloy and tempered glass construction ensure long-lasting strength. Soft silicone pads protect your device from scratches and reduce rattling noise. One-hand release lets you grab your phone quickly.

5-Point Support Design – Provides much steadier hold than ordinary 3-point mounts, keeping your phone secure even on bumpy roads.

Gravity Linkage Mechanism – Automatically clamps your phone when inserted; release with one hand. Effortless and safe while driving.

Premium Materials – Main body made of aircraft-grade aluminum alloy + ABS + toughened glass, durable and scratch-resistant.

Soft Silicone Padding – All contact points are covered with soft silicone, protecting your phone and eliminating vibration noise.

Wide Compatibility – Fits all 4–7 inch screen phones (including most iPhones, Samsungs, and other Android devices).

The phone holder 3:Smart Dual-Mode Wireless & Magnetic Car Phone Mount

 66W wireless charging and 66W magnetic Charging, Auto-Sensing Clamp, Built-in Battery, Ultra-Thin Magnesium Alloy for iPhone & Android (5.4–7.2")

Upgrade your driving experience with the revolutionary car mount that combines wireless freedom and ultra‑fast magnetic charging. The intelligent infrared sensor automatically opens and clamps your phone with a simple approach – true one‑hand operation. For charging, just place your phone on the mount for 15W wireless charging (adapter required), or plug in the included 66W magnetic connector for lightning‑fast charging that rivals wired chargers.

Silicone pads protect your phone from scratches, and the enlarged sensing area guarantees consistent wireless charging performance. Compatible with all phones 5.4–7.2", it’s the ultimate car accessory for modern drivers.

Dual-Mode Charging – Supports 15W wireless charging (QC2.0/3.0 adapter recommended) AND magnetic direct charging up to 66W via the included magnetic connector. Choose wireless convenience or ultra-fast wired speed.

Specification:

Product size:112.5*69*45 mm

color:Black/Silver

Shell material:ABS/PC+Magnesium aluminum alloy

Input voltage:5V-3A,9V-1.67A

Output power:66W,15W,10W,,7. 5W,5W(Automatic identification)

Charging distance:0-6 mm

Conversion efficiency:about 80%

For best wireless charging performance, use a QC2.0/QC3.0 car charger (not included). The wireless charging sensing area is larger and more stable. The included magnetic charging connector supports up to 66W (requires compatible phone and charger). Built‑in lithium battery allows the clamp mechanism and ambient light to function when the car is off.