Bigaimaj Kitchen Countertop Self Adhesive Foil Finish Terrazzo Pattern

Our product dimensions are: width: 70 cm, length: 100 cm (please pay attention to the dimensions when purchasing). after determining your countertop size, choose how many prints you want. for example, if your countertop is 4 meters long, you should order 4 units. we will ship the entire piece to you as 70cm x 400cm.

The countertop foils are laminated. (protective film coating) it is not affected by detergents.

It should not be forgotten that cutting should not be done without a cutting board on it and hot items should not be left directly on it!!!

on products5-10%There may be a difference in tone.

No glue needed it is self adhesive.

You can easily and comfortably apply it yourself.

You too can refresh your kitchen without breaking it, spilling it, or going through the hassle of any renovations!

Our products are printed with latex technology that is harmless to health.

It is not affected by water, oil, or humidity. it is made of erasable material.

 

APPLICATION:You can apply the countertop coating by following these steps. before starting the kitchen countertop coating process with adhesive foil, remove all accessories on the countertop and stove. if there is dirt or food residue on your countertop, wipe it clean using appropriate cleaning products. then, dry it thoroughly so that there is no moisture left, making the surface suitable for coating. measure the countertop using a meter. the most important point you need to pay attention to while measuring is; also the bottom parts of the countertop.  Account. Make markings on the foil with a pencil according to the size you took. You can prevent a mark from remaining on the color or pattern by doing the marking from the reverse side of the foil. Carefully cut using scissors in the places you marked. You can cover baseboards first to get your hand used to it. In this way, you practice for the countertop, which has a larger area. Then start placing the foil on the counter, separating the adhesive part with 5-10 cm. Be as slow and careful as you can when doing this. On the one hand, stick the foil by opening it, and on the other hand, push the parts you stick outwards with the help of a silicone spatula. This is a must to do to avoid air bubbles and get a smooth finish. Continue this process until you completely cover the countertop. if you want, you can cut the foil according to different parts of the countertop and apply it piece by piece. However, the most ideal method is to use the foil in its entirety to cover the countertop. After the coating process is completed in its entirety, you can cut parts like the stove and sink with a utility knife. Trim the excess material along the edge with a utility knife and make any final adjustments. If small air bubbles have formed on the surface despite your care, you can pop them with a needle or toothpick. In the final stage, apply the cold silicone to the corners, around the sink and stove. It is used longer this way.